Use Physical Import Mode
This document introduces how to use the physical import mode in TiDB Lightning, including writing the configuration file, tuning performance, and configuring disk quota.
Configure and use the physical import mode
You can use the following configuration file to execute data import using the physical import mode:
[lightning] # log level = "info" file = "tidb-lightning.log" max-size = 128 # MB max-days = 28 max-backups = 14 # Checks the cluster minimum requirements before start. check-requirements = true [mydumper] # The local data source directory or the external storage URL. data-source-dir = "/data/my_database" [tikv-importer] # Import mode. "local" means using the physical import mode. backend = "local" # The method to resolve the conflicting data. duplicate-resolution = 'remove' # The directory of local KV sorting. sorted-kv-dir = "./some-dir" # Limits the bandwidth in which TiDB Lightning writes data into each TiKV # node in the physical import mode. 0 by default, which means no limit. # store-write-bwlimit = "128MiB" [tidb] # The information of the target cluster. The address of any tidb-server from the cluster. host = "172.16.31.1" port = 4000 user = "root" # Configure the password to connect to TiDB. Either plaintext or Base64 encoded. password = "" # Required. Table schema information is fetched from TiDB via this status-port. status-port = 10080 # Required. The address of any pd-server from the cluster. pd-addr = "172.16.31.4:2379" # tidb-lightning imports the TiDB library, and generates some logs. # Set the log level of the TiDB library. log-level = "error" [post-restore] # Specifies whether to perform `ADMIN CHECKSUM TABLE <table>` for each table to verify data integrity after importing. # The following options are available: # - "required" (default): Perform admin checksum after importing. If checksum fails, TiDB Lightning will exit with failure. # - "optional": Perform admin checksum. If checksum fails, TiDB Lightning will report a WARN log but ignore any error. # - "off": Do not perform checksum after importing. # Note that since v4.0.8, the default value has changed from "true" to "required". # # Note: # 1. Checksum failure usually means import exception (data loss or data inconsistency), so it is recommended to always enable Checksum. # 2. For backward compatibility, bool values "true" and "false" are also allowed for this field. # "true" is equivalent to "required" and "false" is equivalent to "off". checksum = "required" # Specifies whether to perform `ANALYZE TABLE <table>` for each table after checksum is done. # Options available for this field are the same as `checksum`. However, the default value for this field is "optional". analyze = "optional"
For the complete configuration file, refer to the configuration file and command line parameters.
Conflicting data refers to two or more records with the same PK/UK column data. When the data source contains conflicting data, the actual number of rows in the table is different from the total number of rows returned by the query using unique index.
TiDB Lightning offers three strategies for detecting conflicting data:
record: only records conflicting records to the
lightning_task_info.conflict_error_v1table on the target TiDB. Note that the required version of the target TiKV is v5.2.0 or later versions; otherwise, it falls back to 'none'.
remove(recommended): records all conflicting records, like the
recordstrategy. But it removes all conflicting records from the target table to ensure a consistent state in the target TiDB.
none: does not detect duplicate records.
nonehas the best performance in the three strategies, but might lead to inconsistent data in the target TiDB.
Before v5.3, Lightning does not support conflict detection. If there is conflicting data, the import process fails at the checksum step. When conflict detection is enabled, regardless of the
remove strategy, if there is conflicting data, Lightning skips the checksum step (because it always fails).
order_line table has the following schema:
CREATE TABLE IF NOT EXISTS `order_line` ( `ol_o_id` int(11) NOT NULL, `ol_d_id` int(11) NOT NULL, `ol_w_id` int(11) NOT NULL, `ol_number` int(11) NOT NULL, `ol_i_id` int(11) NOT NULL, `ol_supply_w_id` int(11) DEFAULT NULL, `ol_delivery_d` datetime DEFAULT NULL, `ol_quantity` int(11) DEFAULT NULL, `ol_amount` decimal(6,2) DEFAULT NULL, `ol_dist_info` char(24) DEFAULT NULL, PRIMARY KEY (`ol_w_id`,`ol_d_id`,`ol_o_id`,`ol_number`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_bin;
If Lightning detects conflicting data during the import, you can query the
lightning_task_info.conflict_error_v1 table as follows:
mysql> select table_name,index_name,key_data,row_data from conflict_error_v1 limit 10; +---------------------+------------+----------+-----------------------------------------------------------------------------+ | table_name | index_name | key_data | row_data | +---------------------+------------+----------+-----------------------------------------------------------------------------+ | `tpcc`.`order_line` | PRIMARY | 21829216 | (2677, 10, 10, 11, 75656, 10, NULL, 5, 5831.97, "HT5DN3EVb6kWTd4L37bsbogj") | | `tpcc`.`order_line` | PRIMARY | 49931672 | (2677, 10, 10, 11, 75656, 10, NULL, 5, 5831.97, "HT5DN3EVb6kWTd4L37bsbogj") | | `tpcc`.`order_line` | PRIMARY | 21829217 | (2677, 10, 10, 12, 76007, 10, NULL, 5, 9644.36, "bHuVoRfidQ0q2rJ6ZC9Hd12E") | | `tpcc`.`order_line` | PRIMARY | 49931673 | (2677, 10, 10, 12, 76007, 10, NULL, 5, 9644.36, "bHuVoRfidQ0q2rJ6ZC9Hd12E") | | `tpcc`.`order_line` | PRIMARY | 21829218 | (2677, 10, 10, 13, 85618, 10, NULL, 5, 7427.98, "t3rsesgi9rVAKi9tf6an5Rpv") | | `tpcc`.`order_line` | PRIMARY | 49931674 | (2677, 10, 10, 13, 85618, 10, NULL, 5, 7427.98, "t3rsesgi9rVAKi9tf6an5Rpv") | | `tpcc`.`order_line` | PRIMARY | 21829219 | (2677, 10, 10, 14, 15873, 10, NULL, 5, 133.21, "z1vH0e31tQydJGhfNYNa4ScD") | | `tpcc`.`order_line` | PRIMARY | 49931675 | (2677, 10, 10, 14, 15873, 10, NULL, 5, 133.21, "z1vH0e31tQydJGhfNYNa4ScD") | | `tpcc`.`order_line` | PRIMARY | 21829220 | (2678, 10, 10, 1, 44644, 10, NULL, 5, 8463.76, "TWKJBt5iJA4eF7FIVxnugNmz") | | `tpcc`.`order_line` | PRIMARY | 49931676 | (2678, 10, 10, 1, 44644, 10, NULL, 5, 8463.76, "TWKJBt5iJA4eF7FIVxnugNmz") | +---------------------+------------+----------------------------------------------------------------------------------------+ 10 rows in set (0.14 sec)
You can manually identify the records that need to be retained and insert these records into the table.
Pause scheduling on the table level
Starting from v6.2.0, TiDB Lightning implements a mechanism to limit the impact of data import on online applications. With the new mechanism, TiDB Lightning does not pause the global scheduling, but only pauses scheduling for the region that stores the target table data. This significantly reduces the impact of the import on online applications.
By default, TiDB Lightning pauses the cluster scheduling for the minimum range possible. However, under the default configuration, the cluster performance still might be affected by fast import. To avoid this, you can configure the following options to control the import speed and other factors that might impact the cluster performance:
[tikv-importer] # Limits the bandwidth in which TiDB Lightning writes data into each TiKV node in the physical import mode. store-write-bwlimit = "128MiB" [tidb] # Use smaller concurrency to reduce the impact of Checksum and Analyze on the transaction latency. distsql-scan-concurrency = 3 [cron] # Prevent TiKV from switching to import mode. switch-mode = '0'
You can measure the impact of data import on TPCC results by simulating the online application using TPCC and importing data into a TiDB cluster using TiDB Lightning. The test result is as follows:
|64||No significant impact|
|256||No significant impact|
The percentage in the preceding table indicates the impact of data import on TPCC results.
- For the TPM column, the number indicates the percentage of TPM decrease.
- For the P99, P90, and AVG columns, the number indicates the percentage of latency increase.
The test results show that the smaller the concurrency, the larger the impact of data import on TPCC results. When the concurrency is 64 or more, the impact of data import on TPCC results is negligible.
Therefore, if your TiDB cluster has a latency-sensitive application and a low concurrency, it is strongly recommended not to use TiDB Lightning to import data into the cluster. This will cause a significant impact on the online application.
The most direct and effective ways to improve import performance of the physical import mode are as follows:
- Upgrade the hardware of the node where Lightning is deployed, especially the CPU and the storage device of
- Use the parallel import feature to achieve horizontal scaling.
TiDB Lightning provides some concurrency-related configurations to affect import performance in the physical import mode. However, from long-term experience, it is recommended to keep the following four configuration items in the default value. Adjusting the four configuration items does not bring significant performance boost.
[lightning] # The maximum concurrency of engine files. # Each table is split into one "index engine" to store indices, and multiple # "data engines" to store row data. These settings control the maximum # concurrent number for each type of engines. # The two settings controls the maximum concurrency of the two engine files. index-concurrency = 2 table-concurrency = 6 # The concurrency of data. The default value is the number of logical CPUs. region-concurrency = # The maximum concurrency of I/O. When the concurrency is too high, the disk # cache may be frequently refreshed, causing the cache miss and read speed # to slow down. For different storage mediums, this parameter may need to be # adjusted to achieve the best performance. io-concurrency = 5
During the import, each table is split into one "index engine" to store indices, and multiple "data engines" to store row data.
index-concurrency controls the maximum concurrency of the index engine. When you adjust
index-concurrency, make sure that
index-concurrency * the number of source files of each table > region-concurrency to ensure that the CPU is fully utilized. The ratio is usually between 1.5 ~ 2. Do not set
index-concurrency too high and not lower than 2 (default). Too high
index-concurrency causes too many pipelines to be built, which causes the index-engine import stage to pile up.
The same goes for
table-concurrency. Make sure that
table-concurrency * the number of source files of each table > region-concurrency to ensure that the CPU is fully utilized. A recommended value is around
region-concurrency * 4 / the number of source files of each table and not lower than 4.
If the table is large, Lightning will split the table into multiple batches of 100 GiB. The concurrency is controlled by
table-concurrency has little effect on the import speed. You can leave them in the default value.
io-concurrency controls the concurrency of file read. The default value is 5. At any given time, only 5 handles are performing read operations. Because the file read speed is usually not a bottleneck, you can leave this configuration in the default value.
After the file data is read, Lightning needs to do some post-processing, such as encoding and sorting the data locally. The concurrency of these operations is controlled by
region-concurrency. The default value is the number of CPU cores. You can leave this configuration in the default value. It is recommended to deploy Lightning on a separate server from other components. If you must deploy Lightning together with other components, you need to lower the value of
region-concurrency according to the load.
num-threads configuration of TiKV can also affect the performance. For new clusters, it is recommended to set
num-threads to the number of CPU cores.
Configure disk quota New in v6.2.0
When you import data in the physical import mode, TiDB Lightning creates a large number of temporary files on the local disk to encode, sort, and split the original data. When the local disk space is insufficient, TiDB Lightning reports an error and exits because of write failure.
To avoid this situation, you can configure disk quota for TiDB Lightning. When the size of the temporary files exceeds the disk quota, TiDB Lightning pauses the process of reading the source data and writing temporary files. TiDB Lightning prioritizes writing the sorted key-value pairs to TiKV. After deleting the local temporary files, TiDB Lightning continues the import process.
To enable disk quota, add the following configuration to your configuration file:
[tikv-importer] # MaxInt64 by default, which is 9223372036854775807 bytes. disk-quota = "10GB" backend = "local" [cron] # The interval of checking disk quota. 60 seconds by default. check-disk-quota = "30s"
disk-quota limits the storage space used by TiDB Lightning. The default value is MaxInt64, which is 9223372036854775807 bytes. This value is much larger than the disk space you might need for the import, so leaving it as the default value is equivalent to not setting the disk quota.
check-disk-quota is the interval of checking disk quota. The default value is 60 seconds. When TiDB Lightning checks the disk quota, it acquires an exclusive lock for the relevant data, which blocks all the import threads. Therefore, if TiDB Lightning checks the disk quota before every write, it significantly slows down the write efficiency (as slow as a single-thread write). To achieve efficient write, disk quota is not checked before every write; instead, TiDB Lightning pauses all the import threads and checks the disk quota every
check-disk-quota interval. That is, if the value of
check-disk-quota is set to a large value, the disk space used by TiDB Lightning might exceed the disk quota you set, which leaves the disk quota ineffective. Therefore, it is recommended to set the value of
check-disk-quota to a small value. The specific value of this item is determined by the environment in which TiDB Lightning is running. In different environments, TiDB Lightning writes temporary files at different speeds. Theoretically, the faster the speed, the smaller the value of
check-disk-quota should be.