Important

You are viewing the archived documentation of TiDB, which no longer receives updates. It is recommended that you use the latest LTS version of the TiDB database.

Split Region

For each new table created in TiDB, one Region is segmented by default to store the data of this table. This default behavior is controlled by split-table in the TiDB configuration file. When the data in this Region exceeds the default Region size limit, the Region starts to split into two.

In the above case, because there is only one Region at the beginning, all write requests occur on the TiKV where the Region is located. If there are a large number of writes for the newly created table, hotspots are caused.

To solve the hotspot problem in the above scenario, TiDB introduces the pre-split function, which can pre-split multiple Regions for a certain table according to the specified parameters and scatter them to each TiKV node.

Note

This feature is not available on TiDB Serverless clusters.

Synopsis

SplitRegionStmt
SplitSyntaxOption
TableName
PartitionNameList
SplitOption
RowValue

SplitRegionStmt ::=
    "SPLIT" SplitSyntaxOption "TABLE" TableName PartitionNameList? ("INDEX" IndexName)? SplitOption

SplitSyntaxOption ::=
    ("REGION" "FOR")? "PARTITION"?

TableName ::=
    (SchemaName ".")? Identifier

PartitionNameList ::=
    "PARTITION" "(" PartitionName ("," PartitionName)* ")"

SplitOption ::=
    ("BETWEEN" RowValue "AND" RowValue "REGIONS" NUM
|   "BY" RowValue ("," RowValue)* )

RowValue ::=
    "(" ValuesOpt ")"

Usage of Split Region

There are two types of Split Region syntax:

The syntax of even split:
```
SPLIT TABLE table_name [INDEX index_name] BETWEEN (lower_value) AND (upper_value) REGIONS region_num
```
BETWEEN lower_value AND upper_value REGIONS region_num defines the upper boundary, the lower boundary, and the Region amount. Then the current region will be evenly spilt into the number of regions (as specified in region_num) between the upper and lower boundaries.
The syntax of uneven split:
```
SPLIT TABLE table_name [INDEX index_name] BY (value_list) [, (value_list)] ...
```
BY value_list… specifies a series of points manually, based on which the current Region is spilt. It is suitable for scenarios with unevenly distributed data.

The following example shows the result of the SPLIT statement:

+--------------------+----------------------+
| TOTAL_SPLIT_REGION | SCATTER_FINISH_RATIO |
+--------------------+----------------------+
| 4                  | 1.0                  |
+--------------------+----------------------+

TOTAL_SPLIT_REGION: the number of newly split Regions.
SCATTER_FINISH_RATIO: the completion rate of scattering for newly split Regions. 1.0 means that all Regions are scattered. 0.5 means that only half of the Regions are scattered and the rest are being scattered.

Note

The following two session variables might affect the behavior of the SPLIT statement:

tidb_wait_split_region_finish: It might take a while to scatter the Regions. This duration depends on PD scheduling and TiKV loads. This variable is used to control when executing the SPLIT REGION statement whether to return the results to the client until all Regions are scattered. If its value is set to 1 (by default), TiDB returns the results only after the scattering is completed. If its value is set to 0, TiDB returns the results regardless of the scattering status.
tidb_wait_split_region_timeout: This variable is to set the execution timeout of the SPLIT REGION statement, in seconds. The default value is 300s. If the split operation is not completed within the duration, TiDB returns a timeout error.

Split Table Region

The key of row data in each table is encoded by table_id and row_id. The format is as follows:

t[table_id]_r[row_id]

For example, when table_id is 22 and row_id is 11:

t22_r11

Row data in the same table have the same table_id, but each row has its unique row_id that can be used for Region split.

Even Split

Because row_id is an integer, the value of the key to be split can be calculated according to the specified lower_value, upper_value, and region_num. TiDB first calculates the step value (step = (upper_value - lower_value)/region_num). Then split will be done evenly per each "step" between lower_value and upper_value to generate the number of Regions as specified by region_num.

For example, if you want 16 evenly split Regions split from key rangeminInt64~maxInt64 for table t, you can use this statement:

SPLIT TABLE t BETWEEN (-9223372036854775808) AND (9223372036854775807) REGIONS 16;

This statement splits table t into 16 Regions between minInt64 and maxInt64. If the given primary key range is smaller than the specified one, for example, 0~1000000000, you can use 0 and 1000000000 take place of minInt64 and maxInt64 respectively to split Regions.

SPLIT TABLE t BETWEEN (0) AND (1000000000) REGIONS 16;

Uneven split

If the known data is unevenly distributed, and you want a Region to be split respectively in key ranges -inf ~ 10000, 10000 ~ 90000, and 90000 ~ +inf, you can achieve this by setting fixed points, as shown below:

SPLIT TABLE t BY (10000), (90000);

Split index Region

The key of the index data in the table is encoded by table_id, index_id, and the value of the index column. The format is as follows:

t[table_id]_i[index_id][index_value]

For example, when table_id is 22, index_id is 5, and index_value is abc:

t22_i5abc

The table_id and index_id of the same index data in one table is the same. To split index Regions, you need to split Regions based on index_value.

Even Spilt

The way to split index evenly works the same as splitting data evenly. However, calculating the value of step is more complicated, because index_value might not be an integer.

The values of upper and lower are encoded into a byte array firstly. After removing the longest common prefix of lower and upper byte array, the first 8 bytes of lower and upper are converted into the uint64 format. Then step = (upper - lower)/num is calculated. After that, the calculated step is encoded into a byte array, which is appended to the longest common prefix of the lower and upper byte array for index split. Here is an example:

If the column of the idx index is of the integer type, you can use the following SQL statement to split index data:

SPLIT TABLE t INDEX idx BETWEEN (-9223372036854775808) AND (9223372036854775807) REGIONS 16;

This statement splits the Region of index idx in table t into 16 Regions from minInt64 to maxInt64.

If the column of index idx1 is of varchar type, and you want to split index data by prefix letters.

SPLIT TABLE t INDEX idx1 BETWEEN ("a") AND ("z") REGIONS 25;

This statement splits index idx1 into 25 Regions from a~z. The range of Region 1 is [minIndexValue, b); the range of Region 2 is [b, c); … the range of Region 25 is [y, minIndexValue]. For the idx index, data with the a prefix is written into Region 1, and data with the b prefix is written into Region 2.

In the split method above, both data with the y and z prefixes are written into Region 25, because the upper bound is not z, but { (the character next to z in ASCII). Therefore, a more accurate split method is as follows:

SPLIT TABLE t INDEX idx1 BETWEEN ("a") AND ("{") REGIONS 26;

This statement splits index idx1 of the table t into 26 Regions from a~{. The range of Region 1 is [minIndexValue, b); the range of Region 2 is [b, c); … the range of Region 25 is [y, z), and the range of Region 26 is [z, maxIndexValue).

If the column of index idx2 is of time type like timestamp/datetime, and you want to split index Region by year:

SPLIT TABLE t INDEX idx2 BETWEEN ("2010-01-01 00:00:00") AND ("2020-01-01 00:00:00") REGIONS 10;

This statement splits the Region of index idx2 in table t into 10 Regions from 2010-01-01 00:00:00 to 2020-01-01 00:00:00. The range of Region 1 is [minIndexValue, 2011-01-01 00:00:00); the range of Region 2 is [2011-01-01 00:00:00, 2012-01-01 00:00:00).

If you want to split the index Region by day, see the following example:

SPLIT TABLE t INDEX idx2 BETWEEN ("2020-06-01 00:00:00") AND ("2020-07-01 00:00:00") REGIONS 30;

This statement splits the data of June 2020 of index idex2 in table t into 30 Regions, each Region representing 1 day.

Region split methods for other types of index columns are similar.

For data Region split of joint indexes, the only difference is that you can specify multiple columns values.

For example, index idx3 (a, b) contains 2 columns, with column a of timestamp type and column b int. If you just want to do a time range split according to column a, you can use the SQL statement for splitting time index of a single column. In this case, do not specify the value of column b in lower_value and upper_velue.

SPLIT TABLE t INDEX idx3 BETWEEN ("2010-01-01 00:00:00") AND ("2020-01-01 00:00:00") REGIONS 10;

Within the same range of time, if you want to do one more split according to column b column. Just specify the value for column b when splitting.

SPLIT TABLE t INDEX idx3 BETWEEN ("2010-01-01 00:00:00", "a") AND ("2010-01-01 00:00:00", "z") REGIONS 10;

This statement splits 10 Regions in the range of a~z according to the value of column b, with the same time prefix as column a. If the value specified for column a is different, the value of column b might not be used in this case.

If the primary key of the table is a non-clustered index, you need to use backticks ` to escape the PRIMARY keyword when splitting Regions. For example:

SPLIT TABLE t INDEX `PRIMARY` BETWEEN (-9223372036854775808) AND (9223372036854775807) REGIONS 16;

Uneven Split

Index data can also be split by specified index values.

For example, there is idx4 (a,b), with column a of the varchar type and column b of the timestamp type.

SPLIT TABLE t1 INDEX idx4 BY ("a", "2000-01-01 00:00:01"), ("b", "2019-04-17 14:26:19"), ("c", "");

This statement specifies 3 values to split 4 Regions. The range of each Region is as follows:

region1  [ minIndexValue               , ("a", "2000-01-01 00:00:01"))
region2  [("a", "2000-01-01 00:00:01") , ("b", "2019-04-17 14:26:19"))
region3  [("b", "2019-04-17 14:26:19") , ("c", "")                   )
region4  [("c", "")                    , maxIndexValue               )

Split Regions for partitioned tables

Splitting Regions for partitioned tables is the same as splitting Regions for ordinary tables. The only difference is that the same split operation is performed for every partition.

The syntax of even split:

SPLIT [PARTITION] TABLE t [PARTITION] [(partition_name_list...)] [INDEX index_name] BETWEEN (lower_value) AND (upper_value) REGIONS region_num

The syntax of uneven split:

SPLIT [PARTITION] TABLE table_name [PARTITION (partition_name_list...)] [INDEX index_name] BY (value_list) [, (value_list)] ...

Examples of Split Regions for partitioned tables

Create a partitioned table t. Suppose that you want to create a Hash table divided into two partitions. The example statement is as follows:

CREATE TABLE t (a INT, b INT, INDEX idx(a)) PARTITION BY HASH(a) PARTITIONS 2;

After creating the table t, a Region is split for each partition. Use the SHOW TABLE REGIONS syntax to view the Regions of this table:

SHOW TABLE t REGIONS;

+-----------+-----------+---------+-----------+-----------------+------------------+------------+---------------+------------+----------------------+------------------+
| REGION_ID | START_KEY | END_KEY | LEADER_ID | LEADER_STORE_ID | PEERS            | SCATTERING | WRITTEN_BYTES | READ_BYTES | APPROXIMATE_SIZE(MB) | APPROXIMATE_KEYS |
+-----------+-----------+---------+-----------+-----------------+------------------+------------+---------------+------------+----------------------+------------------+
| 1978      | t_1400_   | t_1401_ | 1979      | 4               | 1979, 1980, 1981 | 0          | 0             | 0          | 1                    | 0                |
| 6         | t_1401_   |         | 17        | 4               | 17, 18, 21       | 0          | 223           | 0          | 1                    | 0                |
+-----------+-----------+---------+-----------+-----------------+------------------+------------+---------------+------------+----------------------+------------------+

Use the SPLIT syntax to split a Region for each partition. Suppose that you want to split the data in the [0,10000] range of each partition into four Regions. The example statement is as follows:
```
split partition table t between (0) and (10000) regions 4;
```
In the above statement, 0 and 10000 respectively represent the row_id of the upper and lower boundaries corresponding to the hotspot data you want to scatter.
Note
This example only applies to scenarios where hotspot data is evenly distributed. If the hotspot data is unevenly distributed in a specified data range, refer to the syntax of uneven split in Split Regions for partitioned tables.

Use the SHOW TABLE REGIONS syntax to view the Regions of this table again. You can see that this table now has ten Regions, each partition with five Regions, four of which are the row data and one is the index data.

SHOW TABLE t REGIONS;

+-----------+---------------+---------------+-----------+-----------------+------------------+------------+---------------+------------+----------------------+------------------+
| REGION_ID | START_KEY     | END_KEY       | LEADER_ID | LEADER_STORE_ID | PEERS            | SCATTERING | WRITTEN_BYTES | READ_BYTES | APPROXIMATE_SIZE(MB) | APPROXIMATE_KEYS |
+-----------+---------------+---------------+-----------+-----------------+------------------+------------+---------------+------------+----------------------+------------------+
| 1998      | t_1400_r      | t_1400_r_2500 | 2001      | 5               | 2000, 2001, 2015 | 0          | 132           | 0          | 1                    | 0                |
| 2006      | t_1400_r_2500 | t_1400_r_5000 | 2016      | 1               | 2007, 2016, 2017 | 0          | 35            | 0          | 1                    | 0                |
| 2010      | t_1400_r_5000 | t_1400_r_7500 | 2012      | 2               | 2011, 2012, 2013 | 0          | 35            | 0          | 1                    | 0                |
| 1978      | t_1400_r_7500 | t_1401_       | 1979      | 4               | 1979, 1980, 1981 | 0          | 621           | 0          | 1                    | 0                |
| 1982      | t_1400_       | t_1400_r      | 2014      | 3               | 1983, 1984, 2014 | 0          | 35            | 0          | 1                    | 0                |
| 1990      | t_1401_r      | t_1401_r_2500 | 1992      | 2               | 1991, 1992, 2020 | 0          | 120           | 0          | 1                    | 0                |
| 1994      | t_1401_r_2500 | t_1401_r_5000 | 1997      | 5               | 1996, 1997, 2021 | 0          | 129           | 0          | 1                    | 0                |
| 2002      | t_1401_r_5000 | t_1401_r_7500 | 2003      | 4               | 2003, 2023, 2022 | 0          | 141           | 0          | 1                    | 0                |
| 6         | t_1401_r_7500 |               | 17        | 4               | 17, 18, 21       | 0          | 601           | 0          | 1                    | 0                |
| 1986      | t_1401_       | t_1401_r      | 1989      | 5               | 1989, 2018, 2019 | 0          | 123           | 0          | 1                    | 0                |
+-----------+---------------+---------------+-----------+-----------------+------------------+------------+---------------+------------+----------------------+------------------+

You can also split Regions for the index of each partition. For example, you can split the [1000,10000] range of the idx index into two Regions. The example statement is as follows:
```
SPLIT PARTITION TABLE t INDEX idx BETWEEN (1000) AND (10000) REGIONS 2;
```

Examples of Split Region for a single partition

You can specify the partition to be split.

Create a partitioned table. Suppose that you want to create a Range partitioned table split into three partitions. The example statement is as follows:

CREATE TABLE t ( a INT, b INT, INDEX idx(b)) PARTITION BY RANGE( a ) (
    PARTITION p1 VALUES LESS THAN (10000),
    PARTITION p2 VALUES LESS THAN (20000),
    PARTITION p3 VALUES LESS THAN (MAXVALUE) );

Suppose that you want to split the data in the [0,10000] range of the p1 partition into two Regions. The example statement is as follows:
```
SPLIT PARTITION TABLE t PARTITION (p1) BETWEEN (0) AND (10000) REGIONS 2;
```
Suppose that you want to split the data in the [10000,20000] range of the p2 partition into two Regions. The example statement is as follows:
```
SPLIT PARTITION TABLE t PARTITION (p2) BETWEEN (10000) AND (20000) REGIONS 2;
```

You can use the SHOW TABLE REGIONS syntax to view the Regions of this table:

SHOW TABLE t REGIONS;

+-----------+----------------+----------------+-----------+-----------------+------------------+------------+---------------+------------+----------------------+------------------+
| REGION_ID | START_KEY      | END_KEY        | LEADER_ID | LEADER_STORE_ID | PEERS            | SCATTERING | WRITTEN_BYTES | READ_BYTES | APPROXIMATE_SIZE(MB) | APPROXIMATE_KEYS |
+-----------+----------------+----------------+-----------+-----------------+------------------+------------+---------------+------------+----------------------+------------------+
| 2040      | t_1406_        | t_1406_r_5000  | 2045      | 3               | 2043, 2045, 2044 | 0          | 0             | 0          | 1                    | 0                |
| 2032      | t_1406_r_5000  | t_1407_        | 2033      | 4               | 2033, 2034, 2035 | 0          | 0             | 0          | 1                    | 0                |
| 2046      | t_1407_        | t_1407_r_15000 | 2048      | 2               | 2047, 2048, 2050 | 0          | 35            | 0          | 1                    | 0                |
| 2036      | t_1407_r_15000 | t_1408_        | 2037      | 4               | 2037, 2038, 2039 | 0          | 0             | 0          | 1                    | 0                |
| 6         | t_1408_        |                | 17        | 4               | 17, 18, 21       | 0          | 214           | 0          | 1                    | 0                |
+-----------+----------------+----------------+-----------+-----------------+------------------+------------+---------------+------------+----------------------+------------------+

Suppose that you want to split the [0,20000] range of the idx index of the p1 and p2 partitions into two Regions. The example statement is as follows:
```
SPLIT PARTITION TABLE t PARTITION (p1,p2) INDEX idx BETWEEN (0) AND (20000) REGIONS 2;
```

pre_split_regions

When creating a table with the AUTO_RANDOM or SHARD_ROW_ID_BITS attribute, you can also specify the PRE_SPLIT_REGIONS option if you want to evenly pre-split the table into Regions immediately after the table is created. The number of pre-split Regions for a table is 2^(PRE_SPLIT_REGIONS).

Note

The value of PRE_SPLIT_REGIONS must be less than or equal to that of SHARD_ROW_ID_BITS or AUTO_RANDOM.

The tidb_scatter_region global variable affects the behavior of PRE_SPLIT_REGIONS. This variable controls whether to wait for Regions to be pre-split and scattered before returning results after the table creation. If there are intensive writes after creating the table, you need to set the value of this variable to 1, then TiDB will not return the results to the client until all the Regions are split and scattered. Otherwise, TiDB writes the data before the scattering is completed, which will have a significant impact on write performance.

Examples of pre_split_regions

CREATE TABLE t (a INT, b INT, INDEX idx1(a)) SHARD_ROW_ID_BITS = 4 PRE_SPLIT_REGIONS=2;

After building the table, this statement splits 4 + 1 Regions for table t. 4 (2^2) Regions are used to save table row data, and 1 Region is for saving the index data of idx1.

The ranges of the 4 table Regions are as follows:

region1:   [ -inf      ,  1<<61 )
region2:   [ 1<<61     ,  2<<61 )
region3:   [ 2<<61     ,  3<<61 )
region4:   [ 3<<61     ,  +inf  )

Note

The Region split by the Split Region statement is controlled by the Region merge scheduler in PD. To avoid PD re-merging the newly split Region soon after, you need to use table attributes or dynamically modify configuration items related to the Region merge feature.

MySQL compatibility

This statement is a TiDB extension to MySQL syntax.

Split Region

Synopsis

Usage of Split Region

Split Table Region

Even Split

Uneven split

Split index Region

Even Spilt

Uneven Split

Split Regions for partitioned tables

Examples of Split Regions for partitioned tables

Examples of Split Region for a single partition

pre_split_regions

Examples of pre_split_regions

MySQL compatibility

See also