TiDB Self-Managed
Learning Center
Contact Us
Sign InStart for Free

TiFlash Disaggregated Storage and Compute Architecture and S3 Support

By default, TiFlash is deployed using the coupled storage and compute architecture, in which each TiFlash node acts as both storage and compute node. Starting from TiDB v7.0.0, TiFlash supports the disaggregated storage and compute architecture and allows to store data in Amazon S3 or S3-compatible object storage (such as MinIO).

Architecture overview

TiFlash Write and Compute Separation Architecture

In the disaggregated storage and compute architecture, different functionalities of the TiFlash process are divided and allocated to two types of nodes: the Write Node and the Compute Node. These two types of nodes can be deployed separately and scaled independently, which means that you can decide the number of Write Nodes and Compute Nodes to be deployed as needed.

  • TiFlash Write Node

    The Write Node receives Raft logs data from TiKV, converts the data into the columnar format, and periodically packages and uploads all the updated data within a certain period to S3. In addition, the Write Node manages the data on S3, such as continuously organizing data to improve query performance and deleting useless data.

    The Write Node uses local disks (usually NVMe SSDs) to cache the latest written data to avoid excessive use of memory.

  • TiFlash Compute Node

    The Compute Node executes query requests sent from a TiDB node. It first accesses a Write Node to obtain data snapshots, and then reads the latest data (that is, the data not been uploaded to S3 yet) from the Write Node and most of the remaining data from S3.

    The Compute Node uses local disks (usually NVMe SSDs) as a cache for data files to avoid repeatedly reading the same data from remote locations (Write Nodes or S3) and improve query performance.

    The Compute Node is stateless and its scaling speed is at a second level. You can use this feature to reduce costs as follows:

    • When the query workload is low, reduce the number of Compute Nodes to save costs. When there are no queries, you can even stop all Compute Nodes.
    • When the query workload increases, quickly increase the number of Compute Nodes to ensure query performance.

Scenarios

TiFlash disaggregated storage and compute architecture is suitable for cost-effective data analysis services. Because storage and compute resources can be scaled separately as needed in this architecture, you can get significant benefits in the following scenarios:

  • The amount of data is large, but only a small amount of data is frequently queried. Most of the data is cold data and rarely queried. At this time, the frequently queried data is usually cached on the local SSD of the Compute Node to provide fast query performance, while most of the other cold data is stored in low-cost S3 or other object storage to save storage costs.

  • The demand for compute resources has obvious peaks and valleys. For example, intensive reconciliation queries are usually performed at night, which demands high compute resources. In this case, you can consider temporarily adding more Compute Nodes at night. While at other times, you only need fewer Compute Nodes to complete regular query tasks.

Prerequisites

  1. Prepare an Amazon S3 bucket for storing the TiFlash data.

    You can also use an existing bucket, but you need to reserve dedicated key prefixes for each TiDB cluster. For more information about S3 buckets, see AWS documentation.

    You can also use other S3-compatible object storage, such as MinIO.

    The S3 APIs used by TiFlash are as follows:

    • PutObject
    • GetObject
    • CopyObject
    • DeleteObject
    • ListObjectsV2
    • GetObjectTagging
    • PutBucketLifecycle

  2. Add a lifecycle to the prepared S3 bucket for cleaning up deleted data:

    "ID": "tiflash-clean",
"Expiration": {
    "Days": 1
},
"Filter": {
    "And": {
        "Tags": [
            {
                "Value": "tiflash_deleted", 
                "Key": "true"
            }
        ]
    }
}

  3. Make sure that there are no TiFlash nodes in the TiDB cluster. If any, set the TiFlash replica count of all tables to 0 and then remove all TiFlash nodes. For example:

    SELECT * FROM INFORMATION_SCHEMA.TIFLASH_REPLICA; # Query all tables with TiFlash replicas
ALTER TABLE table_name SET TIFLASH REPLICA 0;     # Set the TiFlash replica count of all tables to `0`

    tiup cluster scale-in mycuster -R tiflash # Remove all TiFlash nodes
tiup cluster display mycluster            # Wait for all TiFlash nodes to enter the Tombstone state
tiup cluster prune mycluster              # Remove all TiFlash nodes in the Tombstone state

Usage

By default, TiUP deploys TiFlash in the coupled storage and computation architecture. If you need to deploy TiFlash in the disaggregated storage and compute architecture, take the following steps for manual configuration:

  1. Prepare a TiFlash topology configuration file, such as scale-out.topo.yaml, with the following configuration:

    tiflash_servers:
  # In the TiFlash topology configuration file, the `storage.s3` configuration indicates that the disaggregated storage and compute architecture is used for deployment.
  # If `flash.disaggregated_mode: tiflash_compute` is configured for a node, it is a Compute Node.
  # If `flash.disaggregated_mode: tiflash_write` is configured for a node, it is a Write Node.

  # 172.31.8.1~2 are TiFlash Write Nodes
  - host: 172.31.8.1
    config:
      flash.disaggregated_mode: tiflash_write               # This is a Write Node
      storage.s3.endpoint: http://s3.{region}.amazonaws.com # S3 endpoint address
      storage.s3.bucket: mybucket                           # TiFlash stores all data in this bucket
      storage.s3.root: /cluster1_data                       # Root directory where data is stored in the S3 bucket
      storage.s3.access_key_id: {ACCESS_KEY_ID}             # Access S3 with ACCESS_KEY_ID
      storage.s3.secret_access_key: {SECRET_ACCESS_KEY}     # Access S3 with SECRET_ACCESS_KEY
      storage.main.dir: ["/data1/tiflash/data"]             # Local data directory of the Write Node. Configure it in the same way as the directory configuration of the coupled storage and compute architecture
  - host: 172.31.8.2
    config:
      flash.disaggregated_mode: tiflash_write               # This is a Write Node
      storage.s3.endpoint: http://s3.{region}.amazonaws.com # S3 endpoint address
      storage.s3.bucket: mybucket                           # TiFlash stores all data in this bucket
      storage.s3.root: /cluster1_data                       # Root directory where data is stored in the S3 bucket
      storage.s3.access_key_id: {ACCESS_KEY_ID}             # Access S3 with ACCESS_KEY_ID
      storage.s3.secret_access_key: {SECRET_ACCESS_KEY}     # Access S3 with SECRET_ACCESS_KEY
      storage.main.dir: ["/data1/tiflash/data"]             # Local data directory of the Write Node. Configure it in the same way as the directory configuration of the coupled storage and compute architecture

  # 172.31.9.1~2 are TiFlash Compute Nodes
  - host: 172.31.9.1
    config:
      flash.disaggregated_mode: tiflash_compute             # This is a Compute Node
      storage.s3.endpoint: http://s3.{region}.amazonaws.com # S3 endpoint address
      storage.s3.bucket: mybucket                           # TiFlash stores all data in this bucket
      storage.s3.root: /cluster1_data                       # Root directory where data is stored in the S3 bucket
      storage.s3.access_key_id: {ACCESS_KEY_ID}             # Access S3 with ACCESS_KEY_ID
      storage.s3.secret_access_key: {SECRET_ACCESS_KEY}     # Access S3 with SECRET_ACCESS_KEY
      storage.main.dir: ["/data1/tiflash/data"]             # Local data directory of the Compute Node. Configure it in the same way as the directory configuration of the coupled storage and compute architecture
      storage.remote.cache.dir: /data1/tiflash/cache        # Local data cache directory of the Compute Node
      storage.remote.cache.capacity: 858993459200           # 800 GiB
  - host: 172.31.9.2
    config:
      flash.disaggregated_mode: tiflash_compute             # This is a Compute Node
      storage.s3.endpoint: http://s3.{region}.amazonaws.com # S3 endpoint address
      storage.s3.bucket: mybucket                           # TiFlash stores all data in this bucket
      storage.s3.root: /cluster1_data                       # Root directory where data is stored in the S3 bucket
      storage.s3.access_key_id: {ACCESS_KEY_ID}             # Access S3 with ACCESS_KEY_ID
      storage.s3.secret_access_key: {SECRET_ACCESS_KEY}     # Access S3 with SECRET_ACCESS_KEY
      storage.main.dir: ["/data1/tiflash/data"]             # Local data directory of the Compute Node. Configure it in the same way as the directory configuration of the coupled storage and compute architecture
      storage.remote.cache.dir: /data1/tiflash/cache        # Local data cache directory of the Compute Node
      storage.remote.cache.capacity: 858993459200           # 800 GiB

    • Note that the above ACCESS_KEY_ID and SECRET_ACCESS_KEY are directly written in the configuration file. You can also choose to configure them separately using environment variables. If both ways are configured, the environment variables have higher priority.

      To configure ACCESS_KEY_ID and SECRET_ACCESS_KEY through environment variables, switch to the user environment that starts the TiFlash process (usually tidb) on all machines where TiFlash processes are deployed, and then modify ~/.bash_profile to add the following configurations:

      export S3_ACCESS_KEY_ID={ACCESS_KEY_ID}
export S3_SECRET_ACCESS_KEY={SECRET_ACCESS_KEY}

    • storage.s3.endpoint supports connecting to S3 using the http or https mode, and you can set the mode by directly modifying the URL. For example, https://s3.{region}.amazonaws.com.

  2. Add TiFlash nodes and reset the number of TiFlash replicas:

    tiup cluster scale-out mycluster ./scale-out.topo.yaml

    ALTER TABLE table_name SET TIFLASH REPLICA 1;

  3. Modify the TiDB configuration to query TiFlash using the disaggregated storage and compute architecture.

    1. Open the TiDB configuration file in edit mode:

      tiup cluster edit-config mycluster

    2. Add the following configuration items to the TiDB configuration file:

      server_configs:
tidb:
disaggregated-tiflash: true   # Query TiFlash using the disaggregated storage and compute architecture

    3. Restart TiDB:

      tiup cluster reload mycluster -R tidb

Restrictions

  • TiFlash does not support in-place switching between the disaggregated storage and compute architecture and the coupled storage and compute architecture. Before switching architectures, you must remove all existing TiFlash nodes.
  • After the migration from one architecture to another, all TiFlash data needs to be replicated again.
  • Only TiFlash nodes with the same architecture are allowed in the same TiDB cluster. Two architectures cannot coexist in one cluster.
  • The disaggregated storage and compute architecture only supports object storage using the S3 API, while the coupled storage and compute architecture only supports local storage.
  • When using S3 storage, TiFlash nodes cannot obtain the keys of files not on their own nodes, so the Encryption at Rest feature cannot be used.
Download PDF