Important

You are viewing the archived documentation of TiDB, which no longer receives updates. It is recommended that you use the latest LTS version of the TiDB database.

TiDB Binlog Cluster Deployment

This document describes how to deploy TiDB Binlog using a Binary package.

Hardware requirements

Pump and Drainer are deployed and operate on 64-bit universal hardware server platforms with Intel x86-64 architecture.

In environments of development, testing and production, the requirements on server hardware are as follows:

Service	The Number of Servers	CPU	Disk	Memory
Pump	3	8 core+	SSD, 200 GB+	16G
Drainer	1	8 core+	SAS, 100 GB+ (If binlogs are output as local files, the disk size depends on how long these files are retained.)	16G

Deploy TiDB Binlog using TiUP

It is recommended to deploy TiDB Binlog using TiUP. To do that, when deploying TiDB using TiUP, you need to add the node information of drainer and pump of TiDB Binlog in TiDB Binlog Deployment Topology. For detailed deployment information, refer to Deploy a TiDB Cluster Using TiUP.

Deploy TiDB Binlog using a binary package

Download the official binary package

The binary package of TiDB Binlog is included in the TiDB Toolkit. To download the TiDB Toolkit, see Download TiDB Tools.

The usage example

Assuming that you have three PD nodes, one TiDB node, two Pump nodes, and one Drainer node, the information of each node is as follows:

Node	IP
TiDB	192.168.0.10
PD1	192.168.0.16
PD2	192.168.0.15
PD3	192.168.0.14
Pump	192.168.0.11
Pump	192.168.0.12
Drainer	192.168.0.13

The following part shows how to use Pump and Drainer based on the nodes above.

Deploy Pump using the binary.

To view the command line parameters of Pump, execute ./pump -help:

Usage of Pump:
-L string
    the output information level of logs: debug, info, warn, error, fatal ("info" by default)
-V
    the print version information
-addr string
    the RPC address through which Pump provides the service (-addr="192.168.0.11:8250")
-advertise-addr string
    the RPC address through which Pump provides the external service (-advertise-addr="192.168.0.11:8250")
-config string
    the path of the configuration file. If you specify the configuration file, Pump reads the configuration in the configuration file first. If the corresponding configuration also exits in the command line parameters, Pump uses the configuration of the command line parameters to cover that of the configuration file.
-data-dir string
    the path where the Pump data is stored
-gc int
    the number of days to retain the data in Pump ("7" by default)
-heartbeat-interval int
    the interval of the heartbeats Pump sends to PD (in seconds)
-log-file string
    the file path of logs
-log-rotate string
    the switch frequency of logs (hour/day)
-metrics-addr string
    the Prometheus Pushgateway address. If not set, it is forbidden to report the monitoring metrics.
-metrics-interval int
    the report frequency of the monitoring metrics ("15" by default, in seconds)
-node-id string
    the unique ID of a Pump node. If you do not specify this ID, the system automatically generates an ID based on the host name and listening port.
-pd-urls string
    the address of the PD cluster nodes (-pd-urls="http://192.168.0.16:2379,http://192.168.0.15:2379,http://192.168.0.14:2379")
-fake-binlog-interval int
    the frequency at which a Pump node generates fake binlog ("3" by default, in seconds)

Taking deploying Pump on "192.168.0.11" as an example, the Pump configuration file is as follows:

# Pump Configuration

# the bound address of Pump
addr = "192.168.0.11:8250"

# the address through which Pump provides the service
advertise-addr = "192.168.0.11:8250"

# the number of days to retain the data in Pump ("7" by default)
gc = 7

# the directory where the Pump data is stored
data-dir = "data.pump"

# the interval of the heartbeats Pump sends to PD (in seconds)
heartbeat-interval = 2

# the address of the PD cluster nodes (each separated by a comma with no whitespace)
pd-urls = "http://192.168.0.16:2379,http://192.168.0.15:2379,http://192.168.0.14:2379"

# [security]
# This section is generally commented out if no special security settings are required.
# The file path containing a list of trusted SSL CAs connected to the cluster.
# ssl-ca = "/path/to/ca.pem"
# The path to the X509 certificate in PEM format that is connected to the cluster.
# ssl-cert = "/path/to/drainer.pem"
# The path to the X509 key in PEM format that is connected to the cluster.
# ssl-key = "/path/to/drainer-key.pem"

# [storage]
# Set to true (by default) to guarantee reliability by ensuring binlog data is flushed to the disk
# sync-log = true

# When the available disk capacity is less than the set value, Pump stops writing data.
# 42 MB -> 42000000, 42 mib -> 44040192
# default: 10 gib
# stop-write-at-available-space = "10 gib"
# The LSM DB settings embedded in Pump. Unless you know this part well, it is usually commented out.
# [storage.kv]
# block-cache-capacity = 8388608
# block-restart-interval = 16
# block-size = 4096
# compaction-L0-trigger = 8
# compaction-table-size = 67108864
# compaction-total-size = 536870912
# compaction-total-size-multiplier = 8.0
# write-buffer = 67108864
# write-L0-pause-trigger = 24
# write-L0-slowdown-trigger = 17

The example of starting Pump:
```
./pump -config pump.toml
```
If the command line parameters is the same with the configuration file parameters, the values of command line parameters are used.

Deploy Drainer using binary.

To view the command line parameters of Drainer, execute ./drainer -help:

Usage of Drainer:
-L string
    the output information level of logs: debug, info, warn, error, fatal ("info" by default)
-V
    the print version information
-addr string
    the address through which Drainer provides the service (-addr="192.168.0.13:8249")
-c int
    the number of the concurrency of the downstream for replication. The bigger the value, the better throughput performance of the concurrency ("1" by default).
-cache-binlog-count int
    the limit on the number of binlog items in the cache ("8" by default)
    If a large single binlog item in the upstream causes OOM in Drainer, try to lower the value of this parameter to reduce memory usage.
-config string
    the directory of the configuration file. Drainer reads the configuration file first.
    If the corresponding configuration exists in the command line parameters, Drainer uses the configuration of the command line parameters to cover that of the configuration file.
-data-dir string
    the directory where the Drainer data is stored ("data.drainer" by default)
-dest-db-type string
    the downstream service type of Drainer
    The value can be "mysql", "tidb", "kafka", and "file". ("mysql" by default)
-detect-interval int
    the interval of checking the online Pump in PD ("10" by default, in seconds)
-disable-detect
    whether to disable the conflict monitoring
-disable-dispatch
    whether to disable the SQL feature of splitting a single binlog file. If it is set to "true", each binlog file is restored to a single transaction for replication based on the order of binlogs.
    It is set to "False", when the downstream is MySQL.
-ignore-schemas string
    the db filter list ("INFORMATION_SCHEMA,PERFORMANCE_SCHEMA,mysql,test" by default)
    It does not support the Rename DDL operation on tables of `ignore schemas`.
-initial-commit-ts
    If Drainer does not have the related breakpoint information, you can configure the related breakpoint information using this parameter. ("-1" by default)
    If the value of this parameter is `-1`, Drainer automatically obtains the latest timestamp from PD.
-log-file string
    the path of the log file
-log-rotate string
    the switch frequency of log files, hour/day
-metrics-addr string
    the Prometheus Pushgateway address
    It it is not set, the monitoring metrics are not reported.
-metrics-interval int
    the report frequency of the monitoring metrics ("15" by default, in seconds)
-node-id string
    the unique ID of a Drainer node. If you do not specify this ID, the system automatically generates an ID based on the host name and listening port.
-pd-urls string
    the address of the PD cluster nodes (-pd-urls="http://192.168.0.16:2379,http://192.168.0.15:2379,http://192.168.0.14:2379")
-safe-mode
    Whether to enable safe mode so that data can be written into the downstream MySQL/TiDB repeatedly.
    This mode replaces the `INSERT` statement with the `REPLACE` statement and splits the `UPDATE` statement into `DELETE` plus `REPLACE`.
-txn-batch int
    the number of SQL statements of a transaction which are output to the downstream database ("1" by default)

Taking deploying Drainer on "192.168.0.13" as an example, the Drainer configuration file is as follows:

# Drainer Configuration.

# the address through which Drainer provides the service ("192.168.0.13:8249")
addr = "192.168.0.13:8249"

# the address through which Drainer provides the external service
advertise-addr = "192.168.0.13:8249"

# the interval of checking the online Pump in PD ("10" by default, in seconds)
detect-interval = 10

# the directory where the Drainer data is stored "data.drainer" by default)
data-dir = "data.drainer"

# the address of the PD cluster nodes (each separated by a comma with no whitespace)
pd-urls = "http://192.168.0.16:2379,http://192.168.0.15:2379,http://192.168.0.14:2379"

# the directory of the log file
log-file = "drainer.log"

# Drainer compresses the data when it gets the binlog from Pump. The value can be "gzip". If it is not configured, it will not be compressed
# compressor = "gzip"

# [security]
# This section is generally commented out if no special security settings are required.
# The file path containing a list of trusted SSL CAs connected to the cluster.
# ssl-ca = "/path/to/ca.pem"
# The path to the X509 certificate in PEM format that is connected to the cluster.
# ssl-cert = "/path/to/pump.pem"
# The path to the X509 key in PEM format that is connected to the cluster.
# ssl-key = "/path/to/pump-key.pem"

# Syncer Configuration
[syncer]
# If the item is set, the sql-mode will be used to parse the DDL statement.
# If the downstream database is MySQL or TiDB, then the downstream sql-mode
# is also set to this value.
# sql-mode = "STRICT_TRANS_TABLES,NO_ENGINE_SUBSTITUTION"

# the number of SQL statements of a transaction that are output to the downstream database ("20" by default)
txn-batch = 20

# the number of the concurrency of the downstream for replication. The bigger the value,
# the better throughput performance of the concurrency ("16" by default)
worker-count = 16

# whether to disable the SQL feature of splitting a single binlog file. If it is set to "true",
# each binlog file is restored to a single transaction for replication based on the order of binlogs.
# If the downstream service is MySQL, set it to "False".
disable-dispatch = false

# In safe mode, data can be written into the downstream MySQL/TiDB repeatedly.
# This mode replaces the `INSERT` statement with the `REPLACE` statement and replaces the `UPDATE` statement with `DELETE` plus `REPLACE` statements.
safe-mode = false

# the downstream service type of Drainer ("mysql" by default)
# Valid value: "mysql", "tidb", "file", and "kafka".
db-type = "mysql"

# If `commit ts` of the transaction is in the list, the transaction is filtered and not replicated to the downstream.
ignore-txn-commit-ts = []

# the db filter list ("INFORMATION_SCHEMA,PERFORMANCE_SCHEMA,mysql,test" by default)
# Does not support the Rename DDL operation on tables of `ignore schemas`.
ignore-schemas = "INFORMATION_SCHEMA,PERFORMANCE_SCHEMA,mysql"

# `replicate-do-db` has priority over `replicate-do-table`. When they have the same `db` name,
# regular expressions are supported for configuration.
# The regular expression should start with "~".

# replicate-do-db = ["~^b.*","s1"]

# [syncer.relay]
# It saves the directory of the relay log. The relay log is not enabled if the value is empty.
# The configuration only comes to effect if the downstream is TiDB or MySQL.
# log-dir = ""
# the maximum size of each file
# max-file-size = 10485760

# [[syncer.replicate-do-table]]
# db-name ="test"
# tbl-name = "log"

# [[syncer.replicate-do-table]]
# db-name ="test"
# tbl-name = "~^a.*"

# Ignore the replication of some tables
# [[syncer.ignore-table]]
# db-name = "test"
# tbl-name = "log"

# the server parameters of the downstream database when `db-type` is set to "mysql"
[syncer.to]
host = "192.168.0.13"
user = "root"
# If you do not want to set a cleartext `password` in the configuration file, you can create `encrypted_password` using `./binlogctl -cmd encrypt -text string`.
# When you have created an `encrypted_password` that is not empty, the `password` above will be ignored, because `encrypted_password` and `password` cannot take effect at the same time.
password = ""
encrypted_password = ""
port = 3306

[syncer.to.checkpoint]
# When the checkpoint type is "mysql" or "tidb", this option can be
# enabled to change the database that saves the checkpoint
# schema = "tidb_binlog"
# Currently only the "mysql" and "tidb" checkpoint types are supported
# You can remove the comment tag to control where to save the checkpoint
# The default method of saving the checkpoint for the downstream db-type:
# mysql/tidb -> in the downstream MySQL or TiDB database
# file/kafka -> file in `data-dir`
# type = "mysql"
# host = "127.0.0.1"
# user = "root"
# password = ""
# `encrypted_password` is encrypted using `./binlogctl -cmd encrypt -text string`.
# When `encrypted_password` is not empty, the `password` above will be ignored.
# encrypted_password = ""
# port = 3306

# the directory where the binlog file is stored when `db-type` is set to `file`
# [syncer.to]
# dir = "data.drainer"

# the Kafka configuration when `db-type` is set to "kafka"
# [syncer.to]
# only one of kafka-addrs and zookeeper-addrs is needed. If both are present, the program gives priority
# to the kafka address in zookeeper
# zookeeper-addrs = "127.0.0.1:2181"
# kafka-addrs = "127.0.0.1:9092"
# kafka-version = "0.8.2.0"
# The maximum number of messages (number of binlogs) in a broker request. If it is left blank or a value smaller than 0 is configured, the default value 1024 is used.
# kafka-max-messages = 1024
# The maximum size of a broker request (unit: byte). The default value is 1 GiB and the maximum value is 2 GiB.
# kafka-max-message-size = 1073741824

# the topic name of the Kafka cluster that saves the binlog data. The default value is <cluster-id>_obinlog.
# To run multiple Drainers to replicate data to the same Kafka cluster, you need to set different `topic-name`s for each Drainer.
# topic-name = ""

Starting Drainer:
Note
If the downstream is MySQL/TiDB, to guarantee the data integrity, you need to obtain the initial-commit-ts value and make a full backup of the data and restore the data before the initial start of Drainer.
When Drainer is started for the first time, use the initial-commit-ts parameter.
```
./drainer -config drainer.toml -initial-commit-ts {initial-commit-ts}
```
If the command line parameter and the configuration file parameter are the same, the parameter value in the command line is used.

Starting TiDB server:
- After starting Pump and Drainer, start TiDB server with binlog enabled by adding this section to your config file for TiDB server:
```
[binlog]
enable=true
```
- TiDB server will obtain the addresses of registered Pumps from PD and will stream data to all of them. If there are no registered Pump instances, TiDB server will refuse to start or will block starting until a Pump instance comes online.

Note

When TiDB is running, you need to guarantee that at least one Pump is running normally.
To enable the TiDB Binlog service in TiDB server, use the -enable-binlog startup parameter in TiDB, or add enable=true to the [binlog] section of the TiDB server configuration file.
Make sure that the TiDB Binlog service is enabled in all TiDB instances in a same cluster, otherwise upstream and downstream data inconsistency might occur during data replication. If you want to temporarily run a TiDB instance where the TiDB Binlog service is not enabled, set run_ddl=false in the TiDB configuration file.
Drainer does not support the rename DDL operation on the table of ignore schemas (the schemas in the filter list).
If you want to start Drainer in an existing TiDB cluster, generally you need to make a full backup of the cluster data, obtain snapshot timestamp, import the data to the target database, and then start Drainer to replicate the incremental data from the corresponding snapshot timestamp.
When the downstream database is TiDB or MySQL, ensure that the sql_mode in the upstream and downstream databases are consistent. In other words, the sql_mode should be the same when each SQL statement is executed in the upstream and replicated to the downstream. You can execute the select @@sql_mode; statement in the upstream and downstream respectively to compare sql_mode.
When a DDL statement is supported in the upstream but incompatible with the downstream, Drainer fails to replicate data. An example is to replicate the CREATE TABLE t1(a INT) ROW_FORMAT=FIXED; statement when the downstream database MySQL uses the InnoDB engine. In this case, you can configure skipping transactions in Drainer, and manually execute compatible statements in the downstream database.