Important

You are viewing the archived documentation of TiDB, which no longer receives updates. It is recommended that you use the latest LTS version of the TiDB database.

BR Use Cases

Backup & Restore (BR) is a tool for distributed backup and restoration of the TiDB cluster data.

This document describes common backup and restoration scenarios:

Back up a single table to a network disk (recommended for production environments)
Restore data from a network disk (recommended for production environments)
Back up a single table to a local disk
Restore data from a local disk

This document aims to help you achieve the following goals:

Back up and restore data using a network disk or local disk correctly.
Get the status of a backup or restoration operation through monitoring metrics.
Learn how to tune performance during the backup or restoration operation.
Troubleshoot the possible anomalies during the backup operation.

Audience

You are expected to have a basic understanding of TiDB and TiKV.

Before reading on, make sure you have read BR Overview, especially Usage Restrictions and Some tips.

Prerequisites

This section introduces the recommended method of deploying TiDB, cluster versions, the hardware information of the TiKV cluster, and the cluster configuration for the use case demonstrations.

You can estimate the performance of your backup or restoration operation based on your own hardware and configuration. It is recommended that you use a network disk to back up and restore data. This spares you from collecting backup files and greatly improves the backup efficiency especially when the TiKV cluster is in a large scale.

Deployment method

It is recommended that you deploy the TiDB cluster using TiUP and install BR using TiUP.

Cluster versions

TiDB: v6.3.0
TiKV: v6.3.0
PD: v6.3.0
BR: v6.3.0

Note

It is recommended that you use the latest version of TiDB/TiKV/PD/BR and make sure that the BR version is consistent with the TiDB version.

TiKV hardware information

Operating system: CentOS Linux release 7.6.1810 (Core)
CPU: 16-Core Common KVM processor
RAM: 32 GB
Disk: 500 GB SSD * 2
NIC: 10 Gigabit network card

Cluster configuration

BR directly sends commands to the TiKV cluster and are not dependent on the TiDB server, so you do not need to configure the TiDB server when using BR.

TiKV: default configuration
PD: default configuration

Others

In addition to the preceding prerequisites, you should also perform the following checks before performing the backup and restoration.

Check before backup

Before running the br backup command, make sure the following conditions are met:

No DDL statements are running on the TiDB cluster.
The target storage device has required space (no less than 1/3 of the disk space of the backup cluster).

Check before restoration

Before running the br restore command, check the target cluster to ensure that the table in this cluster does not have a duplicate name.

Back up a single table to a network disk (recommended for production environments)

Run the br backup command to back up the single table data --db batchmark --table order_line to the specified path local:///br_data in the network disk.

Backup prerequisites

Check before backup
Configure a high-performance SSD hard disk host as the NFS server to store data, and all BR nodes, TiKV nodes, and TiFlash nodes as NFS clients. Mount the same path (for example, /br_data) to the NFS server for NFS clients to access the server.
The total transfer rate between the NFS server and all NFS clients must reach at least the number of TiKV instances * 150MB/s. Otherwise, the network I/O might become the performance bottleneck.

Note

During data backup, because only the data of leader replicas are backed up, even if there is a TiFlash replica in the cluster, BR can complete the backup without mounting TiFlash nodes.
When restoring data, BR will restore the data of all replicas. Also, TiFlash nodes need access to the backup data for BR to complete the restore. Therefore, before the restore, you must mount TiFlash nodes to the NFS server.

Topology

The following diagram shows the typology of BR:

Backup operation

Run the br backup command:

bin/br backup table \
    --db batchmark \
    --table order_line \
    -s local:///br_data \
    --pd ${PD_ADDR}:2379 \
    --log-file backup-nfs.log

Monitoring metrics for the backup

During the backup process, pay attention to the following metrics on the monitoring panels to get the status of the backup process.

Backup CPU Utilization: the CPU usage rate of each working TiKV node in the backup operation (for example, backup-worker and backup-endpoint).

IO Utilization: the I/O usage rate of each working TiKV node in the backup operation.

BackupSST Generation Throughput: the backupSST generation throughput of each working TiKV node in the backup operation, which is normally around 150 MB/s.

One Backup Range Duration: the duration of backing up a range, which is the total time cost of scanning KVs and storing the range as the backupSST file.

One Backup Subtask Duration: the duration of each sub-task into which a backup task is divided.

Note

In this task, the single table to be backed up has three indexes and the task is normally divided into four sub-tasks.
The panel in the following image has 20 points on it, 10 blue and 10 yellow, indicating that there are 10 sub-tasks. Region scheduling might occur during the backup process, so a few retries is normal.

Backup Errors: the errors occurred during the backup process. No error occurs in normal situations. Even if a few errors occur, the backup operation has the retry mechanism which might increase the backup time but does not affect the operation correctness.

Checksum Request Duration: the duration of the admin checksum request in the backup cluster.

Backup results explanation

When finishing the backup, BR outputs the backup summary to the console.

In the log specified before running the backup command, you can get the statistical information of the backup operation from this log. Search "summary" in this log, you can see the following information:

["Full backup Success summary:
    total backup ranges: 2,
    total success: 2,
    total failed: 0,
    total take(Full backup time): 31.802912166s,
    total take(real time): 49.799662427s,
    total size(MB): 5997.49,
    avg speed(MB/s): 188.58,
    total kv: 120000000"]
    ["backup checksum"=17.907153678s]
    ["backup fast checksum"=349.333µs]
    ["backup total regions"=43]
    [BackupTS=422618409346269185]
    [Size=826765915]

The preceding log includes the following information:

total take(Full backup time): Backup duration
total take(real time): Total runtime of the application
total size(MB): The size of the backup data
avg speed(MB/s): Backup throughput
total kv: The number of backed-up KV pairs
backup checksum: Backup checksum duration
backup fast checksum: The total duration of calculating the checksum, KV pairs, and bytes of each table
backup total regions: The total number of backup Regions
BackupTS: The snapshot timestamp of the backup data
Size: The actual size of the backup data in the disk after compression

From the preceding information, the throughput of a single TiKV instance can be calculated: avg speed(MB/s)/tikv_count = 62.86.

Performance tuning

If the resource usage of TiKV does not become an obvious bottleneck during the backup process (for example, in the Monitoring metrics for the backup, the highest CPU usage rate of backup-worker is around 1500% and the overall I/O usage rate is below 30%), you can try to increase the value of --concurrency (4 by default) to tune the performance. But this performance tuning method is not suitable for the use cases of many small tables. See the following example:

bin/br backup table \
    --db batchmark \
    --table order_line \
    -s local:///br_data/ \
    --pd ${PD_ADDR}:2379 \
    --log-file backup-nfs.log \
    --concurrency 16

The tuned performance results are as follows (with the same data size):

Backup duration (total take(s)): reduced from 986.43 to 535.53
Backup throughput (avg speed(MB/s)): increased from 358.09 to 659.59
Throughput of a single TiKV instance (avg speed(MB/s)/tikv_count): increased from 89 to 164.89

Restore data from a network disk (recommended for production environments)

Use the br restore command to restore the complete backup data to an offline cluster. Currently, BR does not support restoring data to an online cluster.

Restoration prerequisites

Check before restore

Topology

The following diagram shows the typology of BR:

Restoration operation

Run the br restore command:

bin/br restore table --db batchmark --table order_line -s local:///br_data --pd 172.16.5.198:2379 --log-file restore-nfs.log

Monitoring metrics for the restoration

During the restoration process, pay attention to the following metrics on the monitoring panels to get the status of the restoration process.

CPU: the CPU usage rate of each working TiKV node in the restoration operation.

IO Utilization: the I/O usage rate of each working TiKV node in the restoration operation.

Region: the Region distribution. The more even Regions are distributed, the better the restoration resources are used.

Process SST Duration: the delay of processing the SST files. When restoring a table, if tableID is changed, you need to rewrite tableID. Otherwise, tableID is renamed. Generally, the delay of rewriting is longer than that of renaming.

DownLoad SST Throughput: the throughput of downloading SST files from External Storage.

Restore Errors: the errors occurred during the restoration process.

Checksum Request Duration: the duration of the admin checksum request. This duration for the restoration is longer than that for the backup.

Restoration results explanation

In the log specified before running the restoration command, you can get the statistical information of the restoration operation from this log. Search "summary" in this log, you can see the following information:

["Table Restore summary:
    total restore tables: 1,
    total success: 1,
    total failed: 0,
    total take(Full restore time): 17m1.001611365s,
    total take(real time): 16m1.371611365s,
    total kv: 5659888624,
    total size(MB): 353227.18,
    avg speed(MB/s): 367.42"]
    ["restore files"=9263]
    ["restore ranges"=6888]
    ["split region"=49.049182743s]
    ["restore checksum"=6m34.879439498s]
    [Size=48693068713]

The preceding log includes the following information:

total take(Full restore time): The restoration duration
total take(real time): The total runtime of the application
total size(MB): The size of the data to be restored
total kv: The number of restored KV pairs
avg speed(MB/s): The restoration throughput
split region: The Region split duration
restore checksum: The restoration checksum duration
Size: The actual size of the restored data in the disk

From the preceding information, the following items can be calculated:

The throughput of a single TiKV instance: avg speed(MB/s)/tikv_count = 91.8
The average restore speed of a single TiKV instance: total size(MB)/(split time + restore time)/tikv_count = 87.4

Performance tuning

If the resource usage of TiKV does not become an obvious bottleneck during the restore process, you can increase the value of --concurrency (defaults to 128). See the following example:

bin/br restore table --db batchmark --table order_line -s local:///br_data/ --pd 172.16.5.198:2379 --log-file restore-concurrency.log --concurrency 1024

The tuned performance results are as follows (with the same data size):

Restoration duration (total take(s)): reduced from 961.37 to 443.49
Restoration throughput (avg speed(MB/s)): increased from 367.42 to 796.47
Throughput of a single TiKV instance (avg speed(MB/s)/tikv_count): increased from 91.8 to 199.1
Average restore speed of a single TiKV instance (total size(MB)/(split time + restore time)/tikv_count): increased from 87.4 to 162.3

Back up a single table to a local disk (recommended for testing environments)

Run the br backup command to back up a single table --db batchmark --table order_line to the specified path local:///home/tidb/backup_local in the local disk.

Backup prerequisites

Check before backup
Each TiKV node has a separate disk to store backupSST files.
The backup_endpoint node has a separate disk to store backupmeta files.
TiKV and the backup_endpoint node share the same directory (for example, /home/tidb/backup_local) for backup.

Topology

The following diagram shows the typology of BR:

Backup operation

Run the br backup command:

bin/br backup table \
    --db batchmark \
    --table order_line \
    -s local:///home/tidb/backup_local/ \
    --pd ${PD_ADDR}:2379 \
    --log-file backup_local.log

During the backup process, pay attention to the metrics on the monitoring panels to get the status of the backup process. See Monitoring metrics for the backup for details.

Backup results explanation

In the log specified before running the backup command, you can get the statistical information of the restoration operation from this log. Search "summary" in this log, you can see the following information:

["Table backup summary:
    total backup ranges: 4,
    total success: 4,
    total failed: 0,
    total take(s): 551.31,
    total kv: 5659888624,
    total size(MB): 353227.18,
    avg speed(MB/s): 640.71"]
    ["backup total regions"=6795]
    ["backup checksum"=6m33.962719217s]
    ["backup fast checksum"=22.995552ms]

The preceding log includes the following information:

total take(s): The backup duration
total size(MB): The data size
avg speed(MB/s): The backup throughput
backup checksum: The backup checksum duration

From the preceding information, the throughput of a single TiKV instance can be calculated: avg speed(MB/s)/tikv_count = 160.

Restore data from a local disk (recommended for testing environments)

Run the br restore command to restore the complete backup data to an offline cluster. Currently, BR does not support restoring data to an online cluster.

Restoration prerequisites

Check before restore
The TiKV cluster and the backup data do not have a duplicate database or table. Currently, BR does not support table route.
Each TiKV node has a separate disk to store backupSST files.
The restore_endpoint node has a separate disk to store backupmeta files.
TiKV and the restore_endpoint node share the same directory (for example, /home/tidb/backup_local/) for restoration.

Before the restoration, follow these steps:

Collect all backupSST files into the same directory.
Copy the collected backupSST files to all TiKV nodes of the cluster.
Copy the backupmeta files to the restore endpoint node.

Topology

The following diagram shows the typology of BR:

Restoration operation

Run the br restore command:

bin/br restore table --db batchmark --table order_line -s local:///home/tidb/backup_local/ --pd 172.16.5.198:2379 --log-file restore_local.log

During the restoration process, pay attention to the metrics on the monitoring panels to get the status of the restoration process. See Monitoring metrics for the restoration for details.

Restoration results explanation

["Table Restore summary:
    total restore tables: 1,
    total success: 1,
    total failed: 0,
    total take(s): 908.42,
    total kv: 5659888624,
    total size(MB): 353227.18,
    avg speed(MB/s): 388.84"]
    ["restore files"=9263]
    ["restore ranges"=6888]
    ["split region"=58.7885518s]
    ["restore checksum"=6m19.349067937s]

The preceding log includes the following information:

total take(s): The restoration duration
total size(MB): The data size
avg speed(MB/s): The restoration throughput
split region: The region split duration
restore checksum: The restoration checksum duration

From the preceding information, the following items can be calculated:

The throughput of a single TiKV instance: avg speed(MB/s)/tikv_count = 97.2
The average restoration speed of a single TiKV instance: total size(MB)/(split time + restore time)/tikv_count = 92.4

Error handling during backup

This section introduces the common errors that might occur during the backup process.

`key locked Error` in the backup log

Error message in the log: log - ["backup occur kv error"][error="{\"KvError\":{\"locked\":

If a key is locked during the backup process, BR tries to resolve the lock. A small number of this error do not affect the correctness of the backup.

Backup failure

Error message in the log: log - Error: msg:"Io(Custom { kind: AlreadyExists, error: \"[5_5359_42_123_default.sst] is already exists in /dir/backup_local/\" })"

If the backup operation fails and the preceding message occurs, perform one of the following operations and then start the backup operation again:

Change the directory for the backup. For example, change /dir/backup-2020-01-01/ to /dir/backup_local/.
Delete the backup directory of all TiKV nodes and BR nodes.

BR Use Cases

Audience

Prerequisites

Deployment method

Cluster versions

TiKV hardware information

Cluster configuration

Others

Check before backup

Check before restoration

Back up a single table to a network disk (recommended for production environments)

Backup prerequisites

Topology

Backup operation

Monitoring metrics for the backup

Backup results explanation

Performance tuning

Restore data from a network disk (recommended for production environments)

Restoration prerequisites

Topology

Restoration operation

Monitoring metrics for the restoration

Restoration results explanation

Performance tuning

Back up a single table to a local disk (recommended for testing environments)

Backup prerequisites

Topology

Backup operation

Backup results explanation

Restore data from a local disk (recommended for testing environments)

Restoration prerequisites

Topology

Restoration operation

Restoration results explanation

Error handling during backup

key locked Error in the backup log

Backup failure

`key locked Error` in the backup log