Important

You are viewing the archived documentation of TiDB, which no longer receives updates. It is recommended that you use the latest LTS version of the TiDB database.

Use BR Command-line for Backup and Restoration

This document describes how to back up and restore TiDB cluster data using the BR command line.

Make sure you have read BR Tool Overview, especially Usage Restrictions and Best Practices.

BR command-line description

A br command consists of sub-commands, options, and parameters.

Sub-command: the characters without - or --.
Option: the characters that start with - or --.
Parameter: the characters that immediately follow behind and are passed to the sub-command or the option.

This is a complete br command:

br backup full --pd "${PDIP}:2379" -s "local:///tmp/backup"

Explanations for the above command are as follows:

backup: the sub-command of br.
full: the sub-command of backup.
-s (or --storage): the option that specifies the path where the backup files are stored.
"local:///tmp/backup": the parameter of -s. /tmp/backup is the path in the local disk where the backed up files of each TiKV node are stored.
--pd: the option that specifies the Placement Driver (PD) service address.
"${PDIP}:2379": the parameter of --pd.

Note

When the local storage is used, the backup data are scattered in the local file system of each node.
It is not recommended to back up to a local disk in the production environment because you have to manually aggregate these data to complete the data restoration. For more information, see Restore Cluster Data.
Aggregating these backup data might cause redundancy and bring troubles to operation and maintenance. Even worse, if restoring data without aggregating these data, you can receive a rather confusing error message SST file not found.
It is recommended to mount the NFS disk on each node, or back up to the S3 object storage.

Sub-commands

A br command consists of multiple layers of sub-commands. Currently, BR has the following three sub-commands:

br backup: used to back up the data of the TiDB cluster.
br restore: used to restore the data of the TiDB cluster.

Each of the above three sub-commands might still include the following three sub-commands to specify the scope of an operation:

full: used to back up or restore all the cluster data.
db: used to back up or restore the specified database of the cluster.
table: used to back up or restore a single table in the specified database of the cluster.

Common options

--pd: used for connection, specifying the PD server address. For example, "${PDIP}:2379".
-h (or --help): used to get help on all sub-commands. For example, br backup --help.
-V (or --version): used to check the version of BR.
--ca: specifies the path to the trusted CA certificate in the PEM format.
--cert: specifies the path to the SSL certificate in the PEM format.
--key: specifies the path to the SSL certificate key in the PEM format.
--status-addr: specifies the listening address through which BR provides statistics to Prometheus.

Use BR command-line to back up cluster data

To back up the cluster data, use the br backup command. You can add the full or table sub-command to specify the scope of your backup operation: the whole cluster or a single table.

If the BR version is earlier than v4.0.8, and the backup duration might exceed the tikv_gc_life_time configuration which is 10m0s by default (10m0s means 10 minutes), increase the value of this configuration item.

For example, set tikv_gc_life_time to 720h:

mysql -h${TiDBIP} -P4000 -u${TIDB_USER} ${password_str} -Nse \
    "update mysql.tidb set variable_value='720h' where variable_name='tikv_gc_life_time'";

Since v4.0.8, BR automatically adapts to GC and you do not need to manually adjust the tikv_gc_life_time value.

Back up all the cluster data

To back up all the cluster data, execute the br backup full command. To get help on this command, execute br backup full -h or br backup full --help.

Usage example:

Back up all the cluster data to the /tmp/backup path of each TiKV node and write the backupmeta file to this path.

Note

If the backup disk and the service disk are different, it has been tested that online backup reduces QPS of the read-only online service by about 15%-25% in case of full-speed backup. If you want to reduce the impact on QPS, use --ratelimit to limit the rate.
If the backup disk and the service disk are the same, the backup competes with the service for I/O resources. This might decrease the QPS of the read-only online service by more than half. Therefore, it is highly not recommended to back up the online service data to the TiKV data disk.

br backup full \
    --pd "${PDIP}:2379" \
    --storage "local:///tmp/backup" \
    --ratelimit 128 \
    --log-file backupfull.log

Explanations for some options in the above command are as follows:

--ratelimit: specifies the maximum speed at which a backup operation is performed (MiB/s) on each TiKV node.
--log-file: specifies writing the BR log to the backupfull.log file.

A progress bar is displayed in the terminal during the backup. When the progress bar advances to 100%, the backup is complete. Then the BR also checks the backup data to ensure data safety. The progress bar is displayed as follows:

br backup full \
    --pd "${PDIP}:2379" \
    --storage "local:///tmp/backup" \
    --ratelimit 128 \
    --log-file backupfull.log
Full Backup <---------/................................................> 17.12%.

Back up a database

To back up a database in the cluster, execute the br backup db command. To get help on this command, execute br backup db -h or br backup db --help.

Usage example:

Back up the data of the test database to the /tmp/backup path on each TiKV node and write the backupmeta file to this path.

br backup db \
    --pd "${PDIP}:2379" \
    --db test \
    --storage "local:///tmp/backup" \
    --ratelimit 128 \
    --log-file backuptable.log

In the above command, --db specifies the name of the database to be backed up. For descriptions of other options, see Back up all the cluster data.

A progress bar is displayed in the terminal during the backup. When the progress bar advances to 100%, the backup is complete. Then the BR also checks the backup data to ensure data safety.

Back up a table

To back up the data of a single table in the cluster, execute the br backup table command. To get help on this command, execute br backup table -h or br backup table --help.

Usage example:

Back up the data of the test.usertable table to the /tmp/backup path on each TiKV node and write the backupmeta file to this path.

br backup table \
    --pd "${PDIP}:2379" \
    --db test \
    --table usertable \
    --storage "local:///tmp/backup" \
    --ratelimit 128 \
    --log-file backuptable.log

The table sub-command has two options:

--db: specifies the database name
--table: specifies the table name.

For descriptions of other options, see Back up all cluster data.

A progress bar is displayed in the terminal during the backup operation. When the progress bar advances to 100%, the backup is complete. Then the BR also checks the backup data to ensure data safety.

Back up with table filter

To back up multiple tables with more complex criteria, execute the br backup full command and specify the table filters with --filter or -f.

Usage example:

The following command backs up the data of all tables in the form db*.tbl* to the /tmp/backup path on each TiKV node and writes the backupmeta file to this path.

br backup full \
    --pd "${PDIP}:2379" \
    --filter 'db*.tbl*' \
    --storage "local:///tmp/backup" \
    --ratelimit 128 \
    --log-file backupfull.log

Back up data to Amazon S3 backend

If you back up the data to the Amazon S3 backend, instead of local storage, you need to specify the S3 storage path in the storage sub-command, and allow the BR node and the TiKV node to access Amazon S3.

You can refer to the AWS Official Document to create an S3 Bucket in the specified Region. You can also refer to another AWS Official Document to create a Folder in the Bucket.

Note

To complete one backup, TiKV and BR usually require the minimum privileges of s3:ListBucket, s3:PutObject, and s3:AbortMultipartUpload.

Pass SecretKey and AccessKey of the account that has privilege to access the S3 backend to the BR node. Here SecretKey and AccessKey are passed as environment variables. Then pass the privilege to the TiKV node through BR.

export AWS_ACCESS_KEY_ID=${AccessKey}
export AWS_SECRET_ACCESS_KEY=${SecretKey}

When backing up using BR, explicitly specify the parameters --s3.region and --send-credentials-to-tikv. --s3.region indicates the region where S3 is located, and --send-credentials-to-tikv means passing the privilege to access S3 to the TiKV node.

br backup full \
    --pd "${PDIP}:2379" \
    --storage "s3://${Bucket}/${Folder}" \
    --s3.region "${region}" \
    --send-credentials-to-tikv=true \
    --ratelimit 128 \
    --log-file backuptable.log

Back up incremental data

If you want to back up incrementally, you only need to specify the last backup timestamp --lastbackupts.

The incremental backup has two limitations:

The incremental backup needs to be under a different path from the previous full backup.
GC (Garbage Collection) safepoint must be before the lastbackupts.

To back up the incremental data between (LAST_BACKUP_TS, current PD timestamp], execute the following command:

br backup full\
    --pd ${PDIP}:2379 \
    --ratelimit 128 \
    -s local:///home/tidb/backupdata/incr \
    --lastbackupts ${LAST_BACKUP_TS}

To get the timestamp of the last backup, execute the validate command. For example:

LAST_BACKUP_TS=`br validate decode --field="end-version" -s local:///home/tidb/backupdata | tail -n1`

In the above example, for the incremental backup data, BR records the data changes and the DDL operations during (LAST_BACKUP_TS, current PD timestamp]. When restoring data, BR first restores DDL operations and then the data.

Back up Raw KV (experimental feature)

Warning

This feature is experimental and not thoroughly tested. It is highly not recommended to use this feature in the production environment.

In some scenarios, TiKV might run independently of TiDB. Given that, BR also supports bypassing the TiDB layer and backing up data in TiKV.

For example, you can execute the following command to back up all keys between [0x31, 0x3130303030303030) in the default CF to $BACKUP_DIR:

br backup raw --pd $PD_ADDR \
    -s "local://$BACKUP_DIR" \
    --start 31 \
    --ratelimit 128 \
    --end 3130303030303030 \
    --format hex \
    --cf default

Here, the parameters of --start and --end are decoded using the method specified by --format before being sent to TiKV. Currently, the following methods are available:

"raw": The input string is directly encoded as a key in binary format.
"hex": The default encoding method. The input string is treated as a hexadecimal number.
"escape": First escape the input string, and then encode it into binary format.

Use BR command-line to restore cluster data

To restore the cluster data, use the br restore command. You can add the full, db or table sub-command to specify the scope of your restoration: the whole cluster, a database or a single table.

Note

If you use the local storage, you must copy all back up SST files to every TiKV node in the path specified by --storage.

Even if each TiKV node eventually only need to read a part of the all SST files, they all need full access to the complete archive because:

Data are replicated into multiple peers. When ingesting SSTs, these files have to be present on all peers. This is unlike back up where reading from a single node is enough.
Where each peer is scattered to during restore is random. We don't know in advance which node will read which file.

These can be avoided using shared storage, for example mounting an NFS on the local path, or using S3. With network storage, every node can automatically read every SST file, so these caveats no longer apply.

Restore all the backup data

To restore all the backup data to the cluster, execute the br restore full command. To get help on this command, execute br restore full -h or br restore full --help.

Usage example:

Restore all the backup data in the /tmp/backup path to the cluster.

br restore full \
    --pd "${PDIP}:2379" \
    --storage "local:///tmp/backup" \
    --ratelimit 128 \
    --log-file restorefull.log

Explanations for some options in the above command are as follows:

--ratelimit: specifies the maximum speed at which a restoration operation is performed (MiB/s) on each TiKV node.
--log-file: specifies writing the BR log to the restorefull.log file.

A progress bar is displayed in the terminal during the restoration. When the progress bar advances to 100%, the restoration is complete. Then the BR also checks the backup data to ensure data safety.

br restore full \
    --pd "${PDIP}:2379" \
    --storage "local:///tmp/backup" \
    --ratelimit 128 \
    --log-file restorefull.log
Full Restore <---------/...............................................> 17.12%.

Restore a database

To restore a database to the cluster, execute the br restore db command. To get help on this command, execute br restore db -h or br restore db --help.

Usage example:

Restore a database backed up in the /tmp/backup path to the cluster.

br restore db \
    --pd "${PDIP}:2379" \
    --db "test" \
    --ratelimit 128 \
    --storage "local:///tmp/backup" \
    --log-file restorefull.log

In the above command, --db specifies the name of the database to be restored. For descriptions of other options, see Restore all backup data).

Note

When you restore the backup data, the name of the database specified by --db must be the same as the one specified by -- db in the backup command. Otherwise, the restore fails. This is because the metafile of the backup data ( backupmeta file) records the database name, you can only restore data to the database with the same name. The recommended method is to restore the backup data to the database with the same name in another cluster.

Restore a table

To restore a single table to the cluster, execute the br restore table command. To get help on this command, execute br restore table -h or br restore table --help.

Usage example:

Restore a table backed up in the /tmp/backup path to the cluster.

br restore table \
    --pd "${PDIP}:2379" \
    --db "test" \
    --table "usertable" \
    --ratelimit 128 \
    --storage "local:///tmp/backup" \
    --log-file restorefull.log

In the above command, --table specifies the name of the table to be restored. For descriptions of other options, see Restore all backup data and Restore a database.

Restore with table filter

To restore multiple tables with more complex criteria, execute the br restore full command and specify the table filters with --filter or -f.

Usage example:

The following command restores a subset of tables backed up in the /tmp/backup path to the cluster.

br restore full \
    --pd "${PDIP}:2379" \
    --filter 'db*.tbl*' \
    --storage "local:///tmp/backup" \
    --log-file restorefull.log

Restore data from Amazon S3 backend

If you restore data from the Amazon S3 backend, instead of local storage, you need to specify the S3 storage path in the storage sub-command, and allow the BR node and the TiKV node to access Amazon S3.

Note

To complete one restore, TiKV and BR usually require the minimum privileges of s3:ListBucket and s3:GetObject.

export AWS_ACCESS_KEY_ID=${AccessKey}
export AWS_SECRET_ACCESS_KEY=${SecretKey}

When restoring data using BR, explicitly specify the parameters --s3.region and --send-credentials-to-tikv. --s3.region indicates the region where S3 is located, and --send-credentials-to-tikv means passing the privilege to access S3 to the TiKV node.

Bucket and Folder in the --storage parameter represent the S3 bucket and the folder where the data to be restored is located.

br restore full \
    --pd "${PDIP}:2379" \
    --storage "s3://${Bucket}/${Folder}" \
    --s3.region "${region}" \
    --ratelimit 128 \
    --send-credentials-to-tikv=true \
    --log-file restorefull.log

In the above command, --table specifies the name of the table to be restored. For descriptions of other options, see Restore a database.

Restore incremental data

Restoring incremental data is similar to restoring full data using BR. Note that when restoring incremental data, make sure that all the data backed up before last backup ts has been restored to the target cluster.

Restore tables created in the `mysql` schema (experimental feature)

BR backs up tables created in the mysql schema by default.

When you restore data using BR, the tables created in the mysql schema are not restored by default. If you need to restore these tables, you can explicitly include them using the table filter. The following example restores mysql.usertable created in mysql schema. The command restores mysql.usertable along with other data.

br restore full -f '*.*' -f '!mysql.*' -f 'mysql.usertable' -s $external_storage_url --ratelimit 128

In the above command, -f '*.*' is used to override the default rules and -f '!mysql.*' instructs BR not to restore tables in mysql unless otherwise stated. -f 'mysql.usertable' indicates that mysql.usertable is required for restore. For detailed implementation, refer to the table filter document.

If you only need to restore mysql.usertable, use the following command:

br restore full -f 'mysql.usertable' -s $external_storage_url --ratelimit 128

Warning

Although you can back up and restore system tables (such as mysql.tidb) using the BR tool, some unexpected situations might occur after the restore, including:

the statistical information tables (mysql.stat_*) cannot be restored.
the system variable tables (mysql.tidb，mysql.global_variables) cannot be restored.
the user information tables (such as mysql.user and mysql.columns_priv) cannot be restored.
GC data cannot be restored.

Restoring system tables might cause more compatibility issues. To avoid unexpected issues, DO NOT restore system tables in the production environment.

Restore Raw KV (experimental feature)

Warning

This feature is in the experiment, without being thoroughly tested. It is highly not recommended to use this feature in the production environment.

Similar to backing up Raw KV, you can execute the following command to restore Raw KV:

br restore raw --pd $PD_ADDR \
    -s "local://$BACKUP_DIR" \
    --start 31 \
    --end 3130303030303030 \
    --ratelimit 128 \
    --format hex \
    --cf default

In the above example, all the backed up keys in the range [0x31, 0x3130303030303030) are restored to the TiKV cluster. The coding methods of these keys are identical to that of keys during the backup process

Online restore (experimental feature)

Warning

This feature is in the experiment, without being thoroughly tested. It also relies on the unstable Placement Rules feature of PD. It is highly not recommended to use this feature in the production environment.

During data restoration, writing too much data affects the performance of the online cluster. To avoid this effect as much as possible, BR supports Placement rules to isolate resources. In this case, downloading and importing SST are only performed on a few specified nodes (or "restore nodes" for short). To complete the online restore, take the following steps.

Configure PD, and start Placement rules:

echo "config set enable-placement-rules true" | pd-ctl

Edit the configuration file of the "restore node" in TiKV, and specify "restore" to the server configuration item:
```
[server]
labels = { exclusive = "restore" }
```
Start TiKV of the "restore node" and restore the backed up files using BR. Compared with the offline restore, you only need to add the --online flag:
```
br restore full \
    -s "local://$BACKUP_DIR" \
    --ratelimit 128 \
    --pd $PD_ADDR \
    --online
```

Use BR Command-line for Backup and Restoration

BR command-line description

Sub-commands

Common options

Use BR command-line to back up cluster data

Back up all the cluster data

Back up a database

Back up a table

Back up with table filter

Back up data to Amazon S3 backend

Back up incremental data

Back up Raw KV (experimental feature)

Use BR command-line to restore cluster data

Restore all the backup data

Restore a database

Restore a table

Restore with table filter

Restore data from Amazon S3 backend

Restore incremental data

Restore tables created in the mysql schema (experimental feature)

Restore Raw KV (experimental feature)

Online restore (experimental feature)

Restore tables created in the `mysql` schema (experimental feature)