データ移行タスクConfiguration / コンフィグレーションガイド

このドキュメントでは、Data Migration (DM) でデータ移行タスクを構成する方法を紹介します。

移行するデータ ソースを構成する

タスクのために移行するデータ ソースを構成する前に、まず、DM が対応するデータ ソースの構成ファイルを読み込んでいることを確認する必要があります。次に、いくつかの操作の参照を示します。

次のmysql-instancesの例は、データ移行タスクのために移行する必要があるデータ ソースを構成する方法を示しています。

--- ## ********* Basic configuration ********* name: test # The name of the task. Should be globally unique. ## ******** Data source configuration ********** mysql-instances: - source-id: "mysql-replica-01" # Migrate data from the data source whose `source-id` is `mysql-replica-01`. - source-id: "mysql-replica-02" # Migrate data from the data source whose `source-id` is `mysql-replica-02`.

ダウンストリーム TiDB クラスターを構成する

次のtarget-databaseの例は、データ移行タスクのために移行先のターゲット TiDB クラスターを構成する方法を示しています。

--- ## ********* Basic configuration ********* name: test # The name of the task. Should be globally unique. ## ******** Data source configuration ********** mysql-instances: - source-id: "mysql-replica-01" # Migrate data from the data source whose `source-id` is `mysql-replica-01`. - source-id: "mysql-replica-02" # Migrate data from the data source whose `source-id` is `mysql-replica-02`. ## ******** Downstream TiDB database configuration ********** target-database: # Configuration of target TiDB database. host: "127.0.0.1" port: 4000 user: "root" password: "" # If the password is not null, it is recommended to use a password encrypted with dmctl.

移行するテーブルを構成する

ノート:

特定のテーブルをフィルタリングしたり、特定のテーブルを移行したりする必要がない場合は、この構成をスキップしてください。

データ移行タスクのデータ ソース テーブルのブロック リストと許可リストを構成するには、次の手順を実行します。

  1. タスク構成ファイルで、ブロックおよび許可リストのグローバル フィルター ルール セットを構成します。

    block-allow-list: bw-rule-1: # The name of the block and allow list rule. do-dbs: ["test.*", "user"] # The allow list of upstream schemas to be migrated. Wildcard characters (*?) are supported. You only need to configure either `do-dbs` or `ignore-dbs`. If both fields are configured, only `do-dbs` takes effect. # ignore-dbs: ["mysql", "account"] # The block list of upstream schemas to be migrated. Wildcard characters (*?) are supported. do-tables: # The allow list of upstream tables to be migrated. You only need to configure either `do-tables` or `ignore-tables`. If both fields are configured, only `do-tables` takes effect. - db-name: "test.*" tbl-name: "t.*" - db-name: "user" tbl-name: "information" bw-rule-2: # The name of the block allow list rule. ignore-tables: # The block list of data source tables needs to be migrated. - db-name: "user" tbl-name: "log"

    詳細な構成規則については、 テーブル リストのブロックと許可を参照してください。

  2. データ ソース構成でブロックおよび許可リスト ルールを参照して、移行するテーブルをフィルター処理します。

    mysql-instances: - source-id: "mysql-replica-01" # Migrate data from the data source whose `source-id` is `mysql-replica-01`. block-allow-list: "bw-rule-1" # The name of the block and allow list rule. If the DM version is earlier than v2.0.0-beta.2, use `black-white-list` instead. - source-id: "mysql-replica-02" # Migrate data from the data source whose `source-id` is `mysql-replica-02`. block-allow-list: "bw-rule-2" # The name of the block and allow list rule. If the DM version is earlier than v2.0.0-beta.2, use `black-white-list` instead.

binlog イベントを移行するように構成する

ノート:

特定のスキーマまたはテーブルの特定の binlog イベントをフィルタリングする必要がない場合は、この構成をスキップしてください。

データ移行タスクの binlog イベントのフィルターを構成するには、次の手順を実行します。

  1. タスク構成ファイルで binlog イベントのグローバル フィルター規則セットを構成します。

    filters: # The filter rule set of data source binlog events. You can set multiple rules at the same time. filter-rule-1: # The name of the filtering rule. schema-pattern: "test_*" # The pattern of the data source schema name. Wildcard characters (*?) are supported. table-pattern: "t_*" # The pattern of the data source table name. Wildcard characters (*?) are supported. events: ["truncate table", "drop table"] # The event types to be filtered out in schemas or tables that match the `schema-pattern` or the `table-pattern`. action: Ignore # Whether to migrate (Do) or ignore (Ignore) the binlog that matches the filtering rule. filter-rule-2: schema-pattern: "test" events: ["all dml"] action: Do

    詳細な構成規則については、 Binlogイベント フィルターを参照してください。

  2. データ ソース構成で binlog イベント フィルタリング ルールを参照して、データ ソース内の指定されたテーブルまたはスキーマの指定された binlog イベントをフィルター処理します。

    mysql-instances: - source-id: "mysql-replica-01" # Migrate data from the data source whose `source-id` is `mysql-replica-01`. block-allow-list: "bw-rule-1" # The name of the block and allow list rule. If the DM version is earlier than v2.0.0-beta.2, use `black-white-list` instead. filter-rules: ["filter-rule-1"] # The name of the rule that filters specific binlog events of the data source. You can configure multiple rules here. - source-id: "mysql-replica-02" # Migrate data from the data source whose `source-id` is `mysql-replica-01`. block-allow-list: "bw-rule-2" # The name of the block and allow list rule. If the DM version is earlier than v2.0.0-beta.2, use `black-white-list` instead. filter-rules: ["filter-rule-2"] # The name of the rule that filters specific binlog events of the data source. You can configure multiple rules here.

下流の TiDB テーブルへのデータ ソース テーブルのマッピングを構成する

ノート:

  • データ ソースの特定のテーブルを、ダウンストリームの TiDB インスタンスで別の名前のテーブルに移行する必要がない場合は、この構成をスキップしてください。

  • シャード マージ タスクの場合は、タスク構成ファイルでマッピング ルールを設定する必要があります。

データ ソース テーブルを指定されたダウンストリーム TiDB テーブルに移行するためのルーティング マッピング ルールを構成するには、次の手順を実行します。

  1. タスク構成ファイルでグローバル ルーティング マッピング ルール セットを構成します。

    routes: # The routing mapping rule set between the data source tables and downstream TiDB tables. You can set multiple rules at the same time. route-rule-1: # The name of the routing mapping rule. schema-pattern: "test_*" # The pattern of the upstream schema name. Wildcard characters (*?) are supported. table-pattern: "t_*" # The pattern of the upstream table name. Wildcard characters (*?) are supported. target-schema: "test" # The name of the downstream TiDB schema. target-table: "t" # The name of the downstream TiDB table. route-rule-2: schema-pattern: "test_*" target-schema: "test"

    詳細な構成規則については、 テーブル ルーティングを参照してください。

  2. データ ソース構成でルーティング マッピング ルールを参照して、移行するテーブルをフィルター処理します。

    mysql-instances: - source-id: "mysql-replica-01" # Migrate data from the data source whose `source-id` is `mysql-replica-01`. block-allow-list: "bw-rule-1" # The name of the block and allow list rule. If the DM version is earlier than v2.0.0-beta.2, use `black-white-list` instead. filter-rules: ["filter-rule-1"] # The name of the rule that filters specific binlog events of the data source. You can configure multiple rules here. route-rules: ["route-rule-1", "route-rule-2"] # The name of the routing mapping rule. You can configure multiple rules here. - source-id: "mysql-replica-02" # Migrate data from the data source whose `source-id` is `mysql-replica-02`. block-allow-list: "bw-rule-2" # The name of the block and allow list rule. If the DM version is earlier than v2.0.0-beta.2, use `black-white-list` instead. filter-rules: ["filter-rule-2"] # The name of the rule that filters specific binlog events of the data source. You can configure multiple rules here.

シャード マージ タスクを構成する

ノート:

  • シャード マージ シナリオでシャーディング DDL ステートメントを移行する必要がある場合は、 shard-modeフィールドを明示的に構成する必要があります。それ以外の場合は、 shard-modeをまったく構成しないでください。

  • シャーディング DDL ステートメントを移行すると、多くの問題が発生する可能性があります。この機能を使用する前に、DDL ステートメントを移行する DM の原則と制限を理解していることを確認し、この機能を慎重に使用する必要があります。

次の例は、タスクをシャード マージ タスクとして構成する方法を示しています。

--- ## ********* Basic information ********* name: test # The name of the task. Should be globally unique. shard-mode: "pessimistic" # The shard merge mode. Optional modes are ""/"pessimistic"/"optimistic". The "" mode is used by default which means sharding DDL merge is disabled. If the task is a shard merge task, set it to the "pessimistic" mode. After getting a deep understanding of the principles and restrictions of the "optimistic" mode, you can set it to the "optimistic" mode.

その他の構成

以下は、本書全体のタスク構成例です。完全なタスク構成テンプレートはDM タスク構成ファイルの完全な紹介にあります。その他の設定項目の使用方法と設定については、 データ移行の特長を参照してください。

--- ## ********* Basic configuration ********* name: test # The name of the task. Should be globally unique. shard-mode: "pessimistic" # The shard merge mode. Optional modes are ""/"pessimistic"/"optimistic". The "" mode is used by default which means sharding DDL merge is disabled. If the task is a shard merge task, set it to the "pessimistic" mode. After getting a deep understanding of the principles and restrictions of the "optimistic" mode, you can set it to the "optimistic" mode. task-mode: all # The task mode. Can be set to `full`(only migrates full data)/`incremental`(replicates binlog synchronously)/`all` (replicates both full and incremental binlogs). timezone: "UTC" # The timezone used in SQL Session. By default, DM uses the global timezone setting in the target cluster, which ensures the correctness automatically. A customized timezone does not affect data migration but is unnecessary. ## ******** Data source configuration ********** mysql-instances: - source-id: "mysql-replica-01" # Migrate data from the data source whose `source-id` is `mysql-replica-01`. block-allow-list: "bw-rule-1" # The name of the block and allow list rule. If the DM version is earlier than v2.0.0-beta.2, use `black-white-list` instead. filter-rules: ["filter-rule-1"] # The name of the rule that filters specific binlog events of the data source. You can configure multiple rules here. route-rules: ["route-rule-1", "route-rule-2"] # The name of the routing mapping rule. You can configure multiple rules here. - source-id: "mysql-replica-02" # Migrate data from the data source whose `source-id` is `mysql-replica-02`. block-allow-list: "bw-rule-2" # The name of the block and allow list rule. If the DM version is earlier than v2.0.0-beta.2, use `black-white-list` instead. filter-rules: ["filter-rule-2"] # The name of the rule that filters specific binlog events of the data source. You can configure multiple rules here. route-rules: ["route-rule-2"] # The name of the routing mapping rule. You can configure multiple rules here. ## ******** Downstream TiDB instance configuration ********** target-database: # Configuration of the downstream database instance. host: "127.0.0.1" port: 4000 user: "root" password: "" # If the password is not null, it is recommended to use a password encrypted with dmctl. ## ******** Feature configuration set ********** # The filter rule set of tables to be migrated from the upstream database instance. You can set multiple rules at the same time. block-allow-list: # Use black-white-list if the DM version is earlier than v2.0.0-beta.2. bw-rule-1: # The name of the block and allow list rule. do-dbs: ["test.*", "user"] # The allow list of upstream schemas to be migrated. Wildcard characters (*?) are supported. You only need to configure either `do-dbs` or `ignore-dbs`. If both fields are configured, only `do-dbs` takes effect. # ignore-dbs: ["mysql", "account"] # The block list of upstream schemas to be migrated. Wildcard characters (*?) are supported. do-tables: # The allow list of upstream tables to be migrated. You only need to configure either `do-tables` or `ignore-tables`. If both fields are configured, only `do-tables` takes effect. - db-name: "test.*" tbl-name: "t.*" - db-name: "user" tbl-name: "information" bw-rule-2: # The name of the block allow list rule. ignore-tables: # The block list of data source tables needs to be migrated. - db-name: "user" tbl-name: "log" # The filter rule set of data source binlog events. filters: # You can set multiple rules at the same time. filter-rule-1: # The name of the filtering rule. schema-pattern: "test_*" # The pattern of the data source schema name. Wildcard characters (*?) are supported. table-pattern: "t_*" # The pattern of the data source table name. Wildcard characters (*?) are supported. events: ["truncate table", "drop table"] # The event types to be filtered out in schemas or tables that match the `schema-pattern` or the `table-pattern`. action: Ignore # Whether to migrate (Do) or ignore (Ignore) the binlog that matches the filtering rule. filter-rule-2: schema-pattern: "test" events: ["all dml"] action: Do # The routing mapping rule set between the data source and target TiDB instance tables. routes: # You can set multiple rules at the same time. route-rule-1: # The name of the routing mapping rule. schema-pattern: "test_*" # The pattern of the data source schema name. Wildcard characters (*?) are supported. table-pattern: "t_*" # The pattern of the data source table name. Wildcard characters (*?) are supported. target-schema: "test" # The name of the downstream TiDB schema. target-table: "t" # The name of the downstream TiDB table. route-rule-2: schema-pattern: "test_*" target-schema: "test"
Playground
新規
登録なしで TiDB の機能をワンストップでインタラクティブに体験できます。
製品
TiDB Cloud
TiDB
価格
PoC お問い合わせ
エコシステム
TiKV
TiFlash
OSS Insight
© 2024 PingCAP. All Rights Reserved.
Privacy Policy.