TiFlash の構成

このドキュメントでは、TiFlash の展開と使用に関連する構成パラメーターを紹介します。

PD スケジューリング パラメータ

pd-ctlを使用して PD スケジューリング パラメータを調整できます。 tiup を使用してクラスターをデプロイおよび管理する場合、 tiup ctl pdを使用してpd-ctl -u <pd_ip:pd_port>を置き換えることができることに注意してください。

  • replica-schedule-limit : レプリカ関連のオペレーターが生成される速度を決定します。このパラメータは、ノードのオフライン化やレプリカの追加などの操作に影響します。

    ノート:

    このパラメータの値はregion-schedule-limitより小さい必要があります。そうしないと、TiKV ノード間の通常のリージョンスケジューリングが影響を受けます。

  • store-balance-rate : 各 TiKV/TiFlash ストアのリージョンがスケジュールされるレートを制限します。このパラメーターは、ストアがクラスターに新しく参加した場合にのみ有効になることに注意してください。既存のストアの設定を変更する場合は、次のコマンドを使用します。

    ノート:

    v4.0.2 以降、 store-balance-rateパラメータは廃止され、 store limitコマンドに変更が加えられました。詳細は店舗制限を参照してください。

    • pd-ctl -u <pd_ip:pd_port> store limit <store_id> <value>コマンドを実行して、指定した店舗のスケジュール率を設定します。 ( store_idを取得するには、 pd-ctl -u <pd_ip:pd_port> storeコマンドを実行できます。
    • 指定されたストアのリージョンのスケジュール レートを設定しない場合、このストアはstore-balance-rateの設定を継承します。
    • pd-ctl -u <pd_ip:pd_port> store limitコマンドを実行して、現在の設定値store-balance-rateを表示できます。
  • replication.location-labels : TiKV インスタンスのトポロジー関係を示します。キーの順序は、異なるラベルの階層関係を示しています。 TiFlash が有効になっている場合、 pd-ctl config placement-rulesを使用してデフォルト値を設定する必要があります。詳細については、 地理的分散展開トポロジを参照してください。

TiFlash 構成パラメータ

このセクションでは、TiFlash の構成パラメーターを紹介します。

tiflash.tomlファイルを構成する

## The listening host for supporting services such as TPC/HTTP. It is recommended to configure it as "0.0.0.0", which means to listen on all IP addresses of this machine. listen_host = "0.0.0.0" ## The TiFlash TCP service port. tcp_port = 9000 ## The TiFlash HTTP service port. http_port = 8123 ## The cache size limit of the metadata of a data block. Generally, you do not need to change this value. mark_cache_size = 5368709120 ## The cache size limit of the min-max index of a data block. Generally, you do not need to change this value. minmax_index_cache_size = 5368709120 ## The cache size limit of the DeltaIndex. The default value is 0, which means no limit. delta_index_cache_size = 0 ## The storage path of TiFlash data. If there are multiple directories, separate each directory with a comma. ## path and path_realtime_mode are deprecated since v4.0.9. Use the configurations ## in the [storage] section to get better performance in the multi-disk deployment scenarios ## Since TiDB v5.2.0, if you need to use the storage.io_rate_limit configuration, you need to set the storage path of TiFlash data to storage.main.dir at the same time. ## When the [storage] configurations exist, both path and path_realtime_mode configurations are ignored. # path = "/tidb-data/tiflash-9000" ## or # path = "/ssd0/tidb-data/tiflash,/ssd1/tidb-data/tiflash,/ssd2/tidb-data/tiflash" ## The default value is false. If you set it to true and multiple directories ## are set in the path, the latest data is stored in the first directory and older ## data is stored in the rest directories. # path_realtime_mode = false ## The path in which the TiFlash temporary files are stored. By default it is the first directory in path ## or in storage.latest.dir appended with "/tmp". # tmp_path = "/tidb-data/tiflash-9000/tmp" ## Storage paths settings take effect starting from v4.0.9 [storage] ## This configuration item is deprecated since v5.2.0. You can use the [storage.io_rate_limit] settings below instead. # bg_task_io_rate_limit = 0 ## DTFile format ## * format_version = 1, the old format, deprecated. ## * format_version = 2, the default format for versions < v6.0.0. ## * format_version = 3, the default format for v6.0.0 and v6.1.x, which provides more data validation features. ## * format_version = 4, the default format for v6.2.0 and later versions, which reduces write amplification and background task resource consumption # format_version = 4 [storage.main] ## The list of directories to store the main data. More than 90% of the total data is stored in ## the directory list. dir = [ "/tidb-data/tiflash-9000" ] ## or # dir = [ "/ssd0/tidb-data/tiflash", "/ssd1/tidb-data/tiflash" ] ## The maximum storage capacity of each directory in storage.main.dir. ## If it is not set, or is set to multiple 0, the actual disk (the disk where the directory is located) capacity is used. ## Note that human-readable numbers such as "10GB" are not supported yet. ## Numbers are specified in bytes. ## The size of the capacity list should be the same with the dir size. ## For example: # capacity = [ 10737418240, 10737418240 ] [storage.latest] ## The list of directories to store the latest data. About 10% of the total data is stored in ## the directory list. The directories (or directory) listed here require higher IOPS ## metrics than those in storage.main.dir. ## If it is not set (by default), the values of storage.main.dir are used. # dir = [ ] ## The maximum storage capacity of each directory in storage.latest.dir. ## If it is not set, or is set to multiple 0, the actual disk (the disk where the directory is located) capacity is used. # capacity = [ 10737418240, 10737418240 ] ## [storage.io_rate_limit] settings are new in v5.2.0. [storage.io_rate_limit] ## This configuration item determines whether to limit the I/O traffic, which is disabled by default. This traffic limit in TiFlash is suitable for cloud storage that has the disk bandwidth of a small and specific size. ## The total I/O bandwidth for disk reads and writes. The unit is bytes and the default value is 0, which means the I/O traffic is not limited by default. # max_bytes_per_sec = 0 ## max_read_bytes_per_sec and max_write_bytes_per_sec have similar meanings to max_bytes_per_sec. max_read_bytes_per_sec means the total I/O bandwidth for disk reads, and max_write_bytes_per_sec means the total I/O bandwidth for disk writes. ## These configuration items limit I/O bandwidth for disk reads and writes separately. You can use them for cloud storage that calculates the limit of I/O bandwidth for disk reads and writes separately, such as the Persistent Disk provided by Google Cloud Platform. ## When the value of max_bytes_per_sec is not 0, max_bytes_per_sec is prioritized. # max_read_bytes_per_sec = 0 # max_write_bytes_per_sec = 0 ## The following parameters control the bandwidth weights assigned to different I/O traffic types. Generally, you do not need to adjust these parameters. ## TiFlash internally divides I/O requests into four types: foreground writes, background writes, foreground reads, background reads. ## When the I/O traffic limit is initialized, TiFlash assigns the bandwidth according to the following weight ratio. ## The following default configurations indicate that each type of traffic gets a weight of 25% (25 / (25 + 25 + 25 + 25) = 25%). ## If the weight is configured to 0, the corresponding I/O traffic is not limited. # foreground_write_weight = 25 # background_write_weight = 25 # foreground_read_weight = 25 # background_read_weight = 25 ## TiFlash supports automatically tuning the traffic limit for different I/O types according to the current I/O load. Sometimes, the tuned bandwidth might exceed the weight ratio set above. ## auto_tune_sec indicates the interval of automatic tuning. The unit is seconds. If the value of auto_tune_sec is 0, the automatic tuning is disabled. # auto_tune_sec = 5 [flash] tidb_status_addr = TiDB status port and address. # Multiple addresses are separated with commas. service_addr = The listening address of TiFlash Raft services and coprocessor services. ## Multiple TiFlash nodes elect a master to add or delete placement rules to PD, ## and the configurations in flash.flash_cluster control this process. [flash.flash_cluster] refresh_interval = Master regularly refreshes the valid period. update_rule_interval = Master regularly gets the status of TiFlash replicas and interacts with PD. master_ttl = The valid period of the elected master. cluster_manager_path = The absolute path of the pd buddy directory. log = The pd buddy log path. [flash.proxy] addr = The listening address of proxy. If it is left empty, 127.0.0.1:20170 is used by default. advertise-addr = The external access address of addr. If it is left empty, "addr" is used by default. data-dir = The data storage path of proxy. config = The configuration file path of proxy. log-file = The log path of proxy. log-level = The log level of proxy. "info" is used by default. status-addr = The listening address from which the proxy pulls metrics | status information. If it is left empty, 127.0.0.1:20292 is used by default. advertise-status-addr = The external access address of status-addr. If it is left empty, "status-addr" is used by default. [logger] ## log level (available options: trace, debug, information, warning, error). The default value is `debug`. level = debug log = TiFlash log path errorlog = TiFlash error log path ## Size of a single log file. The default value is "100M". size = "100M" ## Maximum number of log files to save. The default value is 10. count = 10 [raft] ## PD service address. Multiple addresses are separated with commas. pd_addr = "10.0.1.11:2379,10.0.1.12:2379,10.0.1.13:2379" [status] ## The port through which Prometheus pulls metrics information. The default value is 8234. metrics_port = 8234 [profiles] [profiles.default] ## The default value is false. This parameter determines whether the segment ## of DeltaTree Storage Engine uses logical split. ## Using the logical split can reduce the write amplification. ## However, these are at the cost of disk space waste. ## It is strongly recommended to keep the default value `false` and ## not to change it to `true` in v6.2.0 and later versions. For details, ## see known issue [#5576](https://github.com/pingcap/tiflash/issues/5576). # dt_enable_logical_split = false ## The memory usage limit for the generated intermediate data when a single ## coprocessor query is executed. The default value is 0, which means no limit. max_memory_usage = 0 ## The memory usage limit for the generated intermediate data when all queries ## are executed. The default value is 0 (in bytes), which means no limit. max_memory_usage_for_all_queries = 0 ## New in v5.0. This item specifies the maximum number of cop requests that TiFlash Coprocessor executes at the same time. If the number of requests exceeds the specified value, the exceeded requests will queue. If the configuration value is set to 0 or not set, the default value is used, which is twice the number of physical cores. cop_pool_size = 0 ## New in v5.0. This item specifies the maximum number of batch requests that TiFlash Coprocessor executes at the same time. If the number of requests exceeds the specified value, the exceeded requests will queue. If the configuration value is set to 0 or not set, the default value is used, which is twice the number of physical cores. batch_cop_pool_size = 0 ## New in v6.1.0. This item specifies the number of requests that TiFlash can concurrently process when it receives ALTER TABLE ... COMPACT from TiDB. ## If the value is set to 0, the default value 1 prevails. manual_compact_pool_size = 1 ## New in v5.4.0. This item enables or disables the elastic thread pool feature, which significantly improves CPU utilization in high concurrency scenarios of TiFlash. The default value is true. enable_elastic_threadpool = true ## Compression algorithm of the TiFlash storage engine. The value can be LZ4, zstd, or LZ4HC, and is case-insensitive. By default, LZ4 is used. dt_compression_method = "LZ4" ## Compression level of the TiFlash storage engine. The default value is 1. It is recommended that you set this value to 1 if dt_compression_method is LZ4, -1 (smaller compression rate, but better read performance) or 1 if dt_compression_method is zstd, and 9 if dt_compression_method is LZ4HC. dt_compression_level = 1 ## New in v6.2.0. This item specifies the minimum ratio of valid data in a PageStorage data file. When the ratio of valid data in a PageStorage data file is less than the value of this configuration, GC is triggered to compact data in the file. The default value is 0.5. dt_page_gc_threshold = 0.5 ## Security settings take effect starting from v4.0.5. [security] ## New in v5.0. This configuration item enables or disables log redaction. If the configuration value ## is set to true, all user data in the log will be replaced by ?. ## Note that you also need to set security.redact-info-log for tiflash-learner's logging in tiflash-learner.toml. # redact_info_log = false ## Path of the file that contains a list of trusted SSL CAs. If set, the following settings ## cert_path and key_path are also needed. # ca_path = "/path/to/ca.pem" ## Path of the file that contains X509 certificate in PEM format. # cert_path = "/path/to/tiflash-server.pem" ## Path of the file that contains X509 key in PEM format. # key_path = "/path/to/tiflash-server-key.pem"

tiflash-learner.tomlファイルを構成する

[server] engine-addr = The external access address of the TiFlash coprocessor service. [raftstore] ## The allowable number of threads in the pool that flushes Raft data to storage. apply-pool-size = 4 ## The allowable number of threads that process Raft, which is the size of the Raftstore thread pool. store-pool-size = 4 ## The number of threads that handle snapshots. ## The default number is 2. ## If you set it to 0, the multi-thread optimization is disabled. snap-handle-pool-size = 2 ## The shortest interval at which Raft store persists WAL. ## You can properly increase the latency to reduce IOPS usage. ## The default value is "4ms". ## If you set it to 0ms, the optimization is disabled. store-batch-retry-recv-timeout = "4ms" [security] ## New in v5.0. This configuration item enables or disables log redaction. ## If the configuration value is set to true, ## all user data in the log will be replaced by ?. The default value is false. redact-info-log = false

上記以外のパラメータはTiKVと同じです。キーがenginelabelは予約済みであり、手動で設定することはできません。

トポロジ ラベルごとにレプリカをスケジュールする

利用可能なゾーンを設定するを参照してください。

マルチディスク展開

TiFlash はマルチディスク展開をサポートしています。 TiFlash ノードに複数のディスクがある場合は、次のセクションで説明するパラメーターを構成することで、それらのディスクを最大限に活用できます。 TiUP に使用する TiFlash の構成テンプレートについては、 TiFlash トポロジの複雑なテンプレートを参照してください。

v4.0.9 より前のバージョンの TiDB を使用したマルチディスク展開

v4.0.9 より前の TiDB クラスターの場合、TiFlash はストレージ エンジンのメイン データを複数のディスクに格納することのみをサポートします。 path (TiUP ではdata_dir ) とpath_realtime_modeの構成を指定することで、複数のディスクに TiFlash ノードをセットアップできます。

pathに複数のデータ格納ディレクトリがある場合は、それぞれをカンマで区切ります。たとえば、 /nvme_ssd_a/data/tiflash,/sata_ssd_b/data/tiflash,/sata_ssd_c/data/tiflashです。環境内に複数のディスクがある場合は、各ディレクトリを 1 つのディスクに対応させ、すべてのディスクのパフォーマンスを最大化するために、最高のパフォーマンスを持つディスクを前面に配置することをお勧めします。

TiFlash ノードに同様の I/O メトリクスを持つディスクが複数ある場合は、 path_realtime_modeパラメータをデフォルト値のままにしておくことができます (または明示的にfalseに設定できます)。これは、データがすべてのストレージ ディレクトリに均等に分散されることを意味します。ただし、最新のデータは最初のディレクトリにのみ書き込まれるため、対応するディスクは他のディスクよりもビジーです。

TiFlash ノードに異なる I/O メトリックを持つ複数のディスクがある場合は、 path_realtime_modeからtrueに設定し、最高の I/O メトリックを持つディスクをpathの前に配置することをお勧めします。つまり、最初のディレクトリには最新のデータのみが格納され、古いデータは他のディレクトリに均等に分散されます。この場合、最初のディレクトリの容量は、すべてのディレクトリの合計容量の 10% として計画する必要があることに注意してください。

TiDB v4.0.9 以降を使用したマルチディスク展開

v4.0.9 以降のバージョンの TiDB クラスターの場合、TiFlash はストレージ エンジンのメイン データと最新データを複数のディスクに保存することをサポートします。複数のディスクに TiFlash ノードをデプロイする場合は、ノードを最大限に活用するために、 [storage]セクションでストレージ ディレクトリを指定することをお勧めします。 v4.0.9 ( pathおよびpath_realtime_mode ) より前の構成は引き続きサポートされることに注意してください。

TiFlash ノードに同様の I/O メトリックを持つ複数のディスクがある場合は、 storage.main.dirのリストで対応するディレクトリを指定し、 storage.latest.dirを空のままにすることをお勧めします。 TiFlash は、I/O プレッシャーとデータをすべてのディレクトリに分散します。

TiFlash ノードに異なる I/O メトリックを持つ複数のディスクがある場合は、 storage.latest.dir番目のリストでより高いメトリックを持つディレクトリを指定し、 storage.main.dir番目のリストでより低いメトリックを持つディレクトリを指定することをお勧めします。たとえば、1 つの NVMe-SSD と 2 つの SATA-SSD の場合、 storage.latest.dir["/nvme_ssd_a/data/tiflash"]およびstorage.main.dir["/sata_ssd_b/data/tiflash", "/sata_ssd_c/data/tiflash"]を設定できます。 TiFlash は、I/O プレッシャーとデータをこれら 2 つのディレクトリ リストにそれぞれ分散します。この場合、キャパシティstorage.latest.dirは、合計計画キャパシティの 10% として計画する必要があることに注意してください。

Playground
新規
登録なしで TiDB の機能をワンストップでインタラクティブに体験できます。
製品
TiDB Cloud
TiDB
価格
PoC お問い合わせ
エコシステム
TiKV
TiFlash
OSS Insight
© 2024 PingCAP. All Rights Reserved.
Privacy Policy.